PDF《DIY KIT 122. ATMEL AVR PROGRAMMER》

3 program with input capture or logging allows the data to be saved to a disk file. L write Lock bits Used to program lock bits

1 and 2. All lock bits are programmed C there is no choice. Lock bits are set to '

0'

when they are programmed (locked). C Chip erase Erase the device (electrically). Erasing the device does NOT affect the fuse bits. These are erased using the '

S'

and '

R'

commands. F address Flash memory AVR devices have two types of programmable memory C flash (code) memory and eeprom (data) memory. This command, together with the '

E'

command, is used to select which memory type is being referenced by the '

P'

, '

V'

and '

D'

commands. The command prompt will show which memory type is currently selected. E address Eeprom mem........