PDF《海郑实业（上海）有限公司》

海郑实业(上海)有限公司 冠品化学股份有限公司 大陆授权代理商 周东

18017259379 Q:18017259379 Email:zhoudong@seazheng.

com TEL:86-21-64889379-603 FAX:86-21-64889379-616 http://www.seazheng.cn http://www.seazheng.com 室温固化型导电银胶 A6D/ A6D/ A6D/ A6D/ HA6 HA6 HA6 HA6 产品特色 A6D / HA6 为两液室温固化型导电银胶. A6D 为主剂,HA6 为硬化剂.其使用 方式与一般的A-B胶极为类似.是一种无需使任何用设备的简易电性联接方式. 此产品实现了冷组装的理想,使得电子产品的电性连结不需仅依靠高温焊锡. 此产品符合 RoHS & Halogen-free 规范,且不含 PFOS & PFOA. 因硬化剂量少,为保持称量精确,使用时请将 主 剂加 入硬化剂 中混合 均匀,即可用于接着不同的电子元件,静置于室温

2 小时后即可固化. 产品规格 黏度

15 ±

3 Pa.s @

103 s-1 ;

Cone & plate Rheometer Thixotropic index

3 ±

1 固含量 100% 主剂:硬化剂 9:1 银含量 55% 比重 2.4 ± 0.1 熟化 25°C x

2 hours;

or 75°C x

5 minutes 混合后使用期限

15 分钟 产品保存期限 制造后

12 个月 接着物性 T T T Test est est est Result Result Result Result T T T Test est est est Spcification Spcification Spcification Spcification Volume resistivity

1 m?・cm Mitsubishi Chemical Loresta-EP MCP-T360;

4-probe Peel strength @ 90° >1.0 kg/cm 克瑞富拉力试验机 铜箔涂胶厚 20?m 后对另一铜箔面贴合 Thermal resistance No change in volume resistivity 80°C x

1 hours Water resistance No change in volume resistivity Immersed in water @ 60°C x

4 hour Moisture absorption < 0.3% IPC-TM-650 2.6.2.1 Material Safety Data Sheet Date of issue: July 13,

2012 Product Identity T T T Trade rade rade rade name: name: name: name: A6D A6D A6D A6D / / / / HA6 HA6 HA6 HA6 1. 1. 1. 1. Identification Identification Identification Identification of of of of the the the the product product product product and and and and of of of of the the the the compan compan compan company y y y. . . . Product name A6D / HA6 Company name: Teamchem Company Address: No.14, Lane 276, Yongfeng Road Bade City,Taoyuan County, Taiwan Emergency phone: +886-3375-8654 Preparer: ToddYeh 2. 2. 2. 2. Hazards Hazards Hazards Hazards identification identification identification identification Emergency Overview: Liquid Skin irritant Potential Health Effects: INHALATION: may cause irritation EYE CONTACT: may cause irritation SKIN CONTACT: may cause irritation INGESTION: maybe harmful Teamchem Company 3. 3. 3. 3. Composition/information Composition/information Composition/information Composition/information on on on on ingredients ingredients ingredients ingredients Ingredient Name CAS Number Percent Modified epoxy resin(s) Trade secret

35 Silver Powder 7440-22-4

55 Hardener Trade secret

10 All ingredients comply with applicable rules or orders under TSCA. Weight percents listed above are within 5% of the actual value. 4. 4. 4. 4. First First First First aid aid aid aid measures measures measures measures Eye contact: Rinse eyes with running water for

15 minutes. Consult a doctor. Skin contact: Wash promptly exposed areas with soap and water. Inhalation of aerosol / vapor / dust: Remove victim to fresh air immediately. Ingestion or accident: Get medical attention promptly. If swallowed, seek medical advice immediately 5. 5. 5. 5. Fire Fire Fire Fire fighting fighting fighting fighting measures measures measures measures Extinguishing media: Dry chemical, CO2, foam, water spray Special advice in case of fire: Firefighters should wear self-contained breathing apparatus and eye protection in fighting significant fires in which this material is involved . 6. 6. 6. 6. Accidental Accidental Accidental Accidental release release release release measures measures measures measures After spillage, soak it up with rags or paper towels and dispose it according to local regulations. 7. 7. 7. 7. Handling Handling Handling Handling and and and and storage storage storage storage Handling: Avoid contact with skin and eyes. Storage: It should be stored in a cool, dry, well-ventilated location. 8. 8. 8. 8. Exposure Exposure Exposure Exposure controls controls controls controls and and and and personal personal personal personal protection protection protection protection Personal protective equipment Respiratory: None needed Eye protection: Wear goggles. Hand, skin and body protection: Wear chemical-resistant gloves 9. 9. 9. 9. Physical Physical Physical Physical and and and and chemical chemical chemical chemical properties properties properties properties *Flash point: >100℃ (Seta flash Closed Cup) *Viscosity: 20-30 Pa・s at 25℃ *Solubility in water: insoluble 10. 10. 10. 10. S S S Stability tability tability tability and and and and reactivity reactivity reactivity reactivity Stability: This product is stable under ambient condition. Conditions to avoid: Heat, sunlight. Materials to avoid: Acids, alkalis, amines, peroxides, oxidizing agents. 11. 11. 11. 11. T T T Toxicological oxicological oxicological oxicological information information information information Species Route Exposure and Dose Modified epoxy resin oral-rat LD50>4,000 mg/kg Hardener oral-rat LD50>10,000 mg/kg 12. 12. 12. 12. Ecological Ecological Ecological Ecological information information information information No data 13. 13. 13. 13. Disposal Disposal Disposal Disposal considerations considerations considerations considerations *Local regulations should be adhered to. *Disposal of empty containers 14. 14. 14. 14. T T T Transport ransport ransport ransport information information information information General information: Keep container tightly sealed. Load and unload with care. UN harmful class: None UN package category: None 15. 15. 15. 15. Regulatory Regulatory Regulatory Regulatory information information information information Follow all regulations in your country. Symbol(s) Harmful in contact with skin Harmful if swallowed Irritating to eyes Safety-phrase(s) Avoid contact with skin Avoid contact with eyes In case of contact with eyes, nines immediately with plenty of water and seek medical advice. Take off immediately all contaminated clothing Wear suitable glove Wear eye / face protection 16. 16. 16. 16. Other Other Other Other information information information information This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with legal regulation. The information contained herein is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It should therefore not be construed as guaranteeing specific properties.