PDF《SpeedCEM?》

SpeedCEM? Description SpeedCEM is a self-adhesive, self-curing dental resin cement with light- curing option for the cementation of indirect restorations made of high- strength all-ceramic, composite, metal-ceramic and metal.

When SpeedCEM is used, additional dentin bonding agents are not required.The automix syringe enables a time-saving direct application of the luting material into the restoration. Shades SpeedCEM is available in three shades with various degrees of translucency: C transparent C yellow C white opaque Working and setting times The following times apply as soon as SpeedCEM has been dispensed from the automix syringe. (The working and setting times depend on the ambient temperature): Attention After SpeedCEM has been dispensed from the automix syringe, the setting process can be accelerated by intensive illumination (operating light, ambient light). Composition The monomer matrix is composed of dimethacrylates and acidic monomers. The inorganic fillers are barium glass, ytterbium trifluoride, co-polymer and highly dispersed silicon dioxide.Additional contents are initiators, stabilizers and colour pigments (<

1 %).The primary particle size of the inorganic fillers is between 0.1 ?m and

7 ?m.The mean particle size is

5 ?m.The total content of inorganic fillers is approx.

40 vol%. Indication 1) Permanent cementation on natural teeth in conjunction with restorations made of: C metal and metal-ceramic (inlays, onlays, crowns, bridges, endodontic posts) C high-strength all-ceramic: zirconium oxide, lithium disilicate and aluminium oxide ceramics (crowns, bridges, endodontic posts) C fibre-reinforced composite (endodontic posts) 2) Permanent cementation of crowns and bridges made of: C metal and metal-ceramic Working time Setting time (without working time) At room temperature

23 °C ±

1 °C

150 ±

30 sec

240 ±

60 sec Intra-orally approx.

37 °C ±

1 °C

110 ±

30 sec

160 ±

40 sec C Itsekiinnittyv?, itsekovettuva, hammashoidossa k?ytett?v? yhdistelm?muovisementti, jota valinnaisesti voidaan k?ytt?? valokovetteisena C Kjemisk adhesiv, kjemisk herdende dental komposittsement med mulighet for lysherding C Zelfadhesief, zelfuithardend tand- heelkundig composietcement met de optie van lichtuitharding C Αυτoσυγκoλλητικ?, αυτoπoλυ?ερι ?ενη, oδoντιατρικ? ρητιν?δη? κoν?α ?ε δυνατ τητα φωτoπoλυ?ερισ?o? C Di? hekimli¤inde kullan?lan, kendinden adezif ve kendinden polimerize olan, ???kl? polimerizasyon opsiyonlu kompozit siman ?‰????? ??????? C Samoadhezyjny cement kompozytowy, o podwójnym mechanizmie polimeryzacji C Self-adhesive self-curing dental resin cement with light-curing option C Selbstadh?siver, selbsth?rtender, zahn- ?rztlicher Compositezement mit optionaler Lichth?rtung C Composite de collage, autopolymérisant avec option photopolymérisation C Cemento composito dentale auto- adesivo, autoindurente con opzione di fotoindurimento C Cemento dental composite auto- adhesivo, autopolimerizable con opción de fotopolimerización C Compósito de cimenta??o auto- adesivo, autopolimerizável, com op??o fotopolimerizável C Sj?lvbondande, sj?lvh?rdande, dentalt resincement med ljush?rdnings- m?jlighet C Selvadh?siv, selvh?rdende, dental kompositcement med mulighed for lyspolymerisering English K?ytt?ohjeet Bruksanvisning Productinformatie Oδηγ?ε? Xρ?σεω? Kullan?m K?lavuzu à????????? Instrukcja stosowania Instructions for Use Gebrauchsinformation Mode d'

emploi Istruzioni d'

uso Instrucciones de Uso Instru??es de Uso Bruksanvisning Brugsanvisning 627802/0212/WE3/G For dental use only. Caution: U.S. Federal law restricts this device to sale by or on the order of a licensed dentist. Made in Liechtenstein Ivoclar Vivadent AG, FL-9494 Schaan/Liechtenstein C high-strength all-ceramic: zirconium oxide, lithium disilicate and aluminium oxide ceramics on implant abutments made of: C oxide ceramic (e.g. zirconium oxide) C metal (e.g. titanium) Contraindication SpeedCEM is contraindicated C in situations where the preparation does not provide adequate retention (e.g. veneers). C in situations where the shape of the implant abutment does not provide adequate retention. C if a patient is known to be allergic to any of the ingredients of SpeedCEM. C in general, SpeedCEM should not be applied to exposed pulp or to dentin which is close to the pulp. Side effects Systemic side effects are not known to date. In rare cases, allergic reactions to single components have been reported. Interactions Phenolic substances (e.g. eugenol, wintergreen oil) inhibit the curing process of composites. Consequently, the use of products, e.g. mouth rinses and temporary cements, which contain these components should be avoided. Disinfectants and bleaching agents (e.g. hydrogen peroxide) with an oxidative effect may interact with the initiator system, which in turn may impair the curing process.At least one week should be waited between the application of oxidative bleaching agents and disinfectants and adhesive cementation materials. Alkaline jet media compromise the effect of SpeedCEM. Application Pre-treatment of the cavity or tooth preparation 1. Removal of the temporary restoration and thorough cleaning of the cavity Remove possible residue of the temporary luting composite from the cavity or preparation with a polishing brush and an oil- and fluoride-free cleaning paste. Rinse with water spray.Then lightly dry with water- and oil-free air. Avoid overdrying. Note: Cleaning with alcohol can lead to overdrying of the dentin. 2. Try-in of the restoration and isolation Next, the shade, accuracy of fit and occlusion of the restoration can be checked. Care should be taken when checking the occlusion of fragile and brittle ceramic objects before they are permanently seated, because there is a risk of fracture. If necessary, make corrections with fine diamonds at medium speed and with slight pressure and adequate water cooling. Polish ground surfaces. It is essential to ensure reliable isolation of the o........