XLS《电表统计》

"横琴热电厂电表改造统计表" "序号","楼号","普通单相表","普通三相表","电表箱","电流互感器","空气开关","说明","备注" "1","职工宿舍楼","70","1","7","3",,

"每层楼新装单相表10块,外加一只12表位表箱,总表安装三相表,需要增加800/5电流互感器三只,总表建议安装在总电柜内,需要对安装位置进行改进", "2","合作单位宿舍区","0","3","0","9","2","该区域原有总表为老实机械表,更换为型式电子式三相表,每只电表增加三只150/5电流互感器","板房区、平房区、拓奇宿舍区(共3块),+板房区/广火总开关更换.

" "3","行政楼","0","1","1","3",,

"该区域需要新装一块总电表,需要增加800/5电流互感器三只,表箱一只", "4","生产楼","0","1","1","3",,

"该区域需要新装一块总电表,需要增加800/5电流互感器三只,表箱一只", "合计",,

"70","6","9","18","2",,

,,

,,

,,

, "横琴热电厂水表改造统计表",,

,,

,,

, "序号","楼号","水表","管径","管材","施工方式","说明","备注" "1","职工宿舍楼","70","32mm","PVCR","新装","每层10个房间,每两个房间共用一个水井,一个总进水管和开关,水表安装出水进每间房的管道上", "2","职工宿舍楼","1","110mm","PVCR","新装","管道为高压专用水管,施工难度在整栋楼的排水及法兰熔接,安装完必须做耐压测试", "3","物业宿舍区","3","50mm","PVC","更换","更换","平房区总水表+洗车房水表+食堂水表" "4","合作单位宿舍区","2","50mm","PVC","更换","该区域有一块水表总进水管未找到,其他两块水表运转未发现异常","新增(总水表+拓奇水表),检查板房区+江西中电水表" "5","行政楼","1","80mm","金属","维修","该区域原有水表疑运转异常,建议更换,难度在水表出水端逆流阀是否能正常截留,若不能,难度在出水端的排水", "6","生产楼","1","80mm","金属","维修","该区域原有水表疑运转异常,建议更换,难度在水表出水端逆流阀是否能正常截留,若不能,难度在出水端的排水", "施工单价和工程量预估",,

,,

,,

,,

,,

,,

"金额单位:元" "序号","工程项目","暂估工程量","单位","综合单价","合价","备注" "一","分部分项费用",,

,,

, "1","单相电能表(职工宿舍东)","70","台",,

,"包括新表安装及新表二次接线" "2","三相电能表","6","台",,

,"包括新表安装、旧表拆除及新表二次接线" "3","电流互感器","18","个",,

,"包括进线母排拆除及重新固定,互感器固定,互感器二次接线等" "4","空气开关","2","个",,

,"包括拆除、更换重新安装等" "5","单相电表箱安装(12位)","7","台",,

,"包括表箱固定等" "6","三相电表箱安装(1位)","2","台",,

,"包括表箱固定等" "7","32mm口径水表安装(职工宿舍东)","70","只",,

,"包括切管、法兰熔接、水表安装等" "8","110mm口径水表安装","1","只",,

,"包括切管、法兰熔接、水表安装、出水排水、耐压测试等" "9","50mm口径水表安装","5","只",,

,"包括旧表更换、水表安装、出水排水、耐压测试等" "10","80mm口径水表安装","2","只",,

,"包括旧表更换、水表安装、出水排水、耐压测试等" "11","电源线BVR6.0","1","批",,