PDF《HMC611》

Power Detectors - CHIP

5 5 -

1 For price, delivery and to place orders: Hittite Microwave Corporation,

20 Alpha Road, Chelmsford, MA

01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.

hittite.com Application Support: Phone: 978-250-3343 or [email protected] The HMC611 SiGe BiCMOS Logarithmic Detector/ Controller generates a voltage that is proportional to the log of the RF power envelop presented to its input. The HMC611 employs a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input power is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function. The output of a series of square law detectors is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode, the LOGOUT pin is shorted to the VSET input, and will provide a nominal logarithmic slope of -25 mV/dB and an intercept of

18 dBm (22 dBm for ? ≥ 5.8 GHz). The HMC611 can also be used in the controller mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop. General Description HMC611 Features Functional Diagram Wide Dynamic Range: Up to

70 dB High Accuracy: ±1 dB with

51 dB Range Up to

8 GHz Supply Voltage: +5V Excellent Stability over Temperature Buffered Temperature Sensor Output Die Size: 1.75 x 1.41 x 0.25 mm Typical Applications The HMC611 is ideal for: ? Cellular/PCS/3G ? WiMAX, WiBro, WLAN, Fixed Wireless &

Radar ? Power Monitoring &

Control Circuitry ? Receiver Signal Strength Indication (RSSI) ? Automatic Gain &

Power Control Electrical Specifications, TA = +25C[1] , Vcc1 = 5V, Vcc2 = 5v Parameter Typ. Typ. Typ. Typ. Typ. Units Input Frequency

1 -

3600 5800

7000 8000

10000 MHz ±3 dB Dynamic Range

70 66

62 59

50 dB ±3 dB Dynamic Range Center -25 -23 -21 -20 -15 dBm ±1 dB Dynamic Range

60 61

58 52

42 dB Output Intercept

18 25

23 22

21 dBm Output Slope -25 -24 -26 -28 -32 mV/dB [1] Detector mode measurements;

LOGOUT (Pin 18) is shorted to VSET (Pin 17).

60 dB, LOGARITHMIC DETECTOR / CONTROLLER,

1 -

10000 MHz v04.0209 power detectors - CHIP

5 5 -

2 For price, delivery and to place orders: Hittite Microwave Corporation,

20 Alpha Road, Chelmsford, MA

01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Electrical Specifications, (continued) Parameter Conditions Min. Typ. Max. Units LOGOUT Interface Output Voltage Range

0 Vcc -1.0 V Output Rise Time [3] / Fall Time [4]

10 /

10 ns VSET Interface Input Impedance

30 kΩ Input Voltage Range 0.25 to 1.35 V Low Frequency Gain VSET to LOGOUT

56 dB Open Loop Corner Frequency [2]

700 kHz Power Down (EN) Interface Voltage Range for Normal Mode 0.8 x Vcc [1] Vcc [1] V Voltage Range for Powerdown Mode

0 0.2 x Vcc [1] V Threshold Voltage Vcc [1] /2 V Power Supply (Vcc1, Vcc2) Operating Voltage Range 4.5 5.5 V Supply Current in Normal Mode

103 120 mA Supply Current in Power Down Mode

1 mA [1] Vcc= Vcc1= Vcc2= +5V [2] This parameter describes the open loop gain bandwidth of the HMC611 output amplifier with no feedback from VSET to LOGOUT. [3] -10 dBm Input Pulsed;

measured from 10% to 70%;

C9 removed from board [4] -10 dBm Input Pulsed;

measured from 90% to 10%;

C9 removed from board Parameter Condition Vcc1 = Vcc2 +5V Input Zo - w/

68 Ω Term Resistor at IN+

50 Ω TA +25 C Fin (CW)

900 MHz IN- Port connected to ground through a 1000pF capacitor Test Conditions LOGOUT Voltage &

Error vs. Input Power, Fin =

100 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

50 MHz Unless otherwise noted: Vcc1, Vcc2 = +5V, TA = +25C HMC611 v04.0209

60 dB, LOGARITHMIC DETECTOR / CONTROLLER,

1 -

10000 MHz 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) Power Detectors - CHIP

5 5 -

3 For price, delivery and to place orders: Hittite Microwave Corporation,

20 Alpha Road, Chelmsford, MA

01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Unless otherwise noted: Vcc1, Vcc2 = +5V, TA = +25C HMC611 v04.0209

60 dB, LOGARITHMIC DETECTOR / CONTROLLER,

1 -

10000 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

2200 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

1900 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

900 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

3600 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

5800 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

7000 MHz 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) 0.2 0.8 1.4

2 2.6 -6 -3

0 3

6 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) 0.2 0.8 1.4

2 2.6 -4 -2

0 2

4 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) power detectors - CHIP

5 5 -

4 For price, delivery and to place orders: Hittite Microwave Corporation,

20 Alpha Road, Chelmsford, MA

01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Unless otherwise noted: Vcc1, Vcc2 = +5V, TA = +25C HMC611 v04.0209

60 dB, LOGARITHMIC DETECTOR / CONTROLLER,

1 -

10000 MHz LOGOUT Voltage &

Error vs. Input Power, Fin =

8000 MHz

0 0.6 1.2 1.8 2.4 -10 -5

0 5

10 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) LOGOUT Slope vs. Frequency -32 -30 -28 -26 -24 -22 -20

0 2

4 6

8 10 +25C +85C -40C FREQUENCY (GHz) SLOPE (mV/dB) LOGOUT Voltage &

Error vs. Input Power, Fin =

10000 MHz 0.2 0.8 1.4

2 2.6 -10 -5

0 5

10 -70 -60 -50 -40 -30 -20 -10

0 10 ERR +25C ERR +85C ERR -40C Ideal LOGOUT +25C LOGOUT +85C LOGOUT -40C LOGOUT (V) ERROR (dB) INPUT POWER (dBm) Power Detectors - CHIP

5 5 -

5 For price, delivery and to place orders: Hittite Microwave Corporation,

20 Alpha Road, Chelmsford, MA

01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at........