编辑: lonven | 2018-07-30 |
,,
,,
,,
"序号","设备名称","规格型号","国别","数量(台)","单价(万元)","总价(万元)","主要用途","技术参数","是否满足我方技术参数" "1","数控大容量自动移液器","ZYJ-100","中国","1",,
,"适用于纺织品中甲醛含量、pH值测试批量前处理","
1、电源:Ac220V50Hz
2、功率:30W
3、移液范围:2ml-3000ml
4、最大流量:3.
2L/min
5、重复误差:≤5%
6、整机重量:5kg
7、移液防滴功能:有
8、断电记忆功能:有
9、水泵自吸功能:有
10、泵体耐酸碱:是
11、配全不锈钢筛Ф150mm*55mm,150目2个
12、配全不锈钢筛Ф60mm*55mm,150目2个性能特点水泵泵体采用耐腐蚀材料,泵体与电机分离,泵体内无金属机械部件,具有自吸功能与热保护,无磨损,运转平稳,适用于长时间工作场所.(1)进口单片机控制,效率高,耗电低(2)数码管显示器哦,触摸面板操作方便简单(3)电位器调节电机运转,方便高效(4)自动移液精度高,重复性好,计量准确(5)产品性能稳定,使用寿命长(6)泵体耐酸碱腐蚀", "2","单槽超声波清洗机","JL-18","中国","1",,
,"用于五氯苯酚项目等超声前处理及玻璃仪器清洗","
1、内槽尺寸:500*350*350(L);
2、材料304#2.5厚
3、超声波频率:40KHz,换能器18个;
4、发生器(电源)1台;
5、发生器(电源)功能:①电流、清洗时间显示②功率可调③自动追踪免人工调试④扫频功能⑤定时;
6、超声波功率:900W;
7、加热功率4KW;
8、温度常温-100℃.", "3","超声波清洗器KQ5200DE","KQ5200DE","中国","1",,
,"用于样品前处理","1.仪器尺寸:320*264*340(mm)2.内槽尺寸:300*240*150(mm)3.容量:10L4.超声频率:40KHZ5.超声功率:200W6.功率可调:40-100%7.进水液位:1-120(mm)8.加热功率:400W9.温度可调:10-80℃10.时间可调:1-480min11.累计时间:999999123.网架:不锈钢13.降音盖:不锈钢", "4","水循环真空泵","SHB-(III)","国产","1",,
,"样品抽滤","SHZ-D(III)双表双抽循环水式真空泵的技术参数如下:1.功率(W):1802.工作电源V/HZ:220/503.流量L/min(Q):604.扬程M:85.机体材质:1Cr186.最大真空泵Mpa:0.0987.单头抽气量L/min:108.抽气头数(个):29.储水箱容量L:15", "5","连续分配移液枪","大龙StepMateStepper","国产","2",,
,"溶液分配","档数设置:1-5排液次数:48-8德国进口分配器管嘴50ml,非灭菌装,25支,含适配器一支分液管量程(ml):50.00样品量(?l):1000-5000A%:±0.2P%:≤0.2德国进口分配器管嘴12.5ml,非灭菌装,100支分液管量程(ml):12.50样品量(?l):250-1250A%:±0.3P%:≤0.3", "6","数显恒温干燥箱","上海荣丰科学仪器有限公司","中国","1",,
,"样品前处理","型号202AS-1工作室尺寸(MM)450X450X350外径尺寸(MM)740X560X700电压(V)220功率1.6", "7","蠕动泵","兰格BT300-1F","中国","1",,
,"用于液体培养基的配制后分装","1.分配液量范围为:2mL~99.9mL或更大范围,可设置;
可进行时间间隔的自动分液,分配时间间隔可达1秒或以下,配备手动与脚踏开关;
2.泵头为优质PPS材料不锈钢一体轴承,化学耐受性强,性能稳定.3.液晶数显流量、转速,以及分配液量值,精度高,误差≤1%;
3.喷嘴、分装器硅胶管都可高压灭菌,反复使用;
配17#、25#硅胶管各5米.4.对设定的流量进行校正,从而获得最精确的流量值,适合定时定量传输液体.5.液体流速快:≥1000mL/min.6.软管入口和出口处连接不锈钢接头,便于手持.", "8","水浴恒温恒速振荡器","SHY-2A","中国","1",,