DOC《德力西电气有限公司》

德力西电气有限公司 APPROVAL SHEET Customer: Customer P/N: Model NO.

DHAZL6025H24B P/N: Version.V0 Sample NO.:

20161201002 Issue date: 2016-12-01 Quantity: *Please sign back this specification for our record upon your approval. Thanks! Company Stamp CUSTOMER APPROVAL Stamp 制作: 承认: 复核: 核准: 核准: 日期: 1.0:一般规格(General Speci fication) 项目(Item) 规格/条件(Specification/Condition)

1 型号(Mode1 No.) DHAZL6025H24B

2 外型尺寸(Outline. Dimension) 60*60*25

3 工作电压(Operating Voltage) DC 12-26.4V

4 额定电压(Rated .voltage) DC 24.0 V

5 起动电压Starting Voltage DC ≤12.0V on/off

6 额定电流(Rated current) 0.09A a. 额定电压(Rated .voltage) b.25℃ 65% RH c.After testing for

5 minutes

7 消耗功率(Power consumption) 2.16W

8 转速(Speed) 4500±10%RPM

9 风量:( Airflow) (AT ZERO STATIC PRESSURE) 26.7CFM a. 额定电压(Rated .voltage) b. AMCA标准(Standard) C. 额定电流(Rated current) 静压:(Air .Static Pressure) (AT ZERO AIRFLOW) 5.4mmH2O

10 最大噪音(Max Noise) 37.7dBA(Max:39.7dBA) a. 额定电压 (Rated Voltage) b. 18dB无响室 (18dB Non-Echo Chamber) c. 标准 (Standard):CNS

8753 / ISO

3744 d. Test Condition :ISO

7779 e. 距离 (Distance): 1.0 M

11 Life expectancy(期望寿命)

70000 hrs at temp40℃ Humidity5%-65% MTTF (Mean Time To Failure) Conf. Level 90%)

12 扇叶数(No.of.Blade) 7叶13 极数(No.of.Pole) 4极14 运转方向(Rotating Direction) 逆时针

15 锁住保护 Lock Protection 1.额定电压堵住2~3秒,自动断电.降低内部温升 (Auto power off after locked at rated voltage for 2~3 sec. Reduce internal temperature rise) 2.自动断电后,2至6秒自动尝试启动. (After auto power off, circuit attempt to restart in

2 to

6 sec.)

16 极性保护 Polarity Protection Vcc与GND反接时,?导通. (Open circuit when Vcc & GND are exchanged)

17 PQ曲线 2.0:主要材料/零件规格(Main Materials/parts Specification) 材料/零件( Materials/parts) 规格(Specification)

1 塑料材料/扇叶 外框 (Plastic Material/ Fname ImpeIIer) PBT黑色方框7叶2轴承(Bearing Type) Ball Bearing

3 引线(Lead Wire) UL UL1007#24#300mm黑红分线 黑红GND VCC

4 环保要求 (EnvironmentalRequirement) 3.0电性规格(Electrical Specifically)

1 绝缘阻抗 Insulation Resistance 10MΩ/裸线与外框间测量,500VDC/min 10MΩ/between unshackled wire and frame at 500VDC/min

2 绝缘耐压 Dielectric Strength 5Ma Max./导线与外框间测量,500VAC/min 5Ma Max./Measured between lead wire(+)and frame at 500VAC/min

3 防水等级 Waterproof level IP XO 4.0环境测试(Environmental Specification)

1 运转温/湿度范围 Operating Temp .Range 温度/Temperature:-10℃ - +70℃ 湿度/Humidity:5% - 65%RH

2 保存温/湿度范围 Storage Temperature 温度/Temperature:-40℃ - +75℃ 湿度/Humidity:5% - 65%RH

3 耐湿性 Humidity 电气规格依据MIL-STD 202F Method 103B 湿度:65%RH 温度:40±2℃

4 热冲击 Thermal Shock 电气规格依据MIL-STD 202F Method 107D Per MIL-STD 202F Method 107D,Condition D

5 绝缘阶段 Insulation Shock UL: A种UL:Class A

6 包装耐振动试验 Packing Vibration Test 包装后,XYZ三方向施1.1G load vibration test for 30min .No serious damage

7 包装耐冲击试验 Packing Shock Proof Test 捆包后,高60公分,1棱角3边6面自然落下,无严重损坏. 1comer,3edges, 6faces natural drop from 60cm high packing No serious damage 5.0在无响室额定电压下之噪音测试 (NOISE IS MEASURED AT RATED VOLTAGE IN ANECHOIC) (在背景噪音不超过18dB(A)的无响室内,将待测风扇通入额定的工作电压,悬掉入空中,将麦克风放于风扇同一平面且离待测风扇进风口一米处进行测试其 B&K 值) Noise is measured rated voItage in free air in anechoic chamber with B&K sound IeveI meter with microphone at a distance of one meter from the fan intake.The background noise is 18Db(A) max. 6.0 成品图 SPEC DRAWING 注意事项(NOTES)

1 Before use, make sure the supply voltage to meet the use of the product range, line-powered load exceeds the maximum power consumption of this product 120%. And the voltage is stable without clutter (使用前,确认供电电压能满足本产品的使用范围,供电电路负载超过本产品的最大功耗的120%.且电压是稳定不含杂波干扰)

2 Please when ventilator circular telegram normal work do not use the hand to bump touches fan blade border (请在风扇通电正常运转时不要用手碰触扇叶边沿)

3 Please do not touch the impeller and never carry the fan the lead wires.The bearings and the lead wires may be damaged. Additionally, static electricity may damage the intemal ciruits of the fan (请不要碰触扇叶和拉扯线材,以免损坏轴承及导线.此外,静电可能损坏内部的风扇组件)

4 Please do not use the fan in the environment of corrosive gas or liquid. (请不要将风扇置于腐蚀的气体和液体内)

5 Please do not store the an in the environmet of high humidity.Please avoid storage of the fan over 6months.For long term storage, please connect power to the fan shortly every

6 months even through the fan is stored in room temperature. (请不要将风扇储存在高湿度的环境中,请尽量避免将风扇储存期超过6个月.如果要长期储存,请将其在室温的环境下.且每隔6个月须上电源让风扇短时间运转.)