DOC《373D自动剪线控制箱说明书》

373D自动剪线控制箱说明书 SUPU 373D User manual of

0 Auto-Trimmer control box 目录 Contents 电控介绍 Servo System Introduction 1:显示屏常用操作介绍 Introduction of display screen common Operation 2:如何进入参数与如何修改参数 How to enter parameters and how to modify the parameters 3:操作参数说明表 Operating Parameter Description Table 4:控制箱端口说明 The control box Port Description 5:错误代码解析 Error code analysis 6:装箱单 Packing List 1:显示屏常用操作介绍 Introduction of display screen common Operation 序号No.

1 按键图标 Button Icons 功能说明Function Description

1 LED (A) 当压脚放下到位时LED指示灯A亮起,压脚抬起或压脚放置不到位时LED指示灯A熄灭.(可用作判断压脚实时情况,易可用来判断压脚动作传感器好坏) When Press foot put into correct place LED lamp A on, When Press foot up or put into wrong place LED lamp A off.(It can be analyzed the presser foot Actual situation,Also to judge the quality of the presser foot motion sensor )

2 LED (B) 当机器左侧开机找针位的小铝轮旋转到某个固定位置被传感器感应到后LED指示灯B亮起.(可用来判断感应铝轮传感器的好坏) When small aluminum wheel in left of machine is rotated to a fixed position ( The Al. wheel will auto to find needle stop position when machine open),It will be detected by sensor, LED lamp B will light. (It also can be used to judge the quality of aluminum wheel sensor )

3 LED (C) 电机上针位指示LED Up Needle position of motor LED

4 LED (D) 此LED指示灯为系统状态指示灯,当系统处于运行状态时LED指示灯D亮起,当系统处于待机时LED指示灯D熄灭. This LED system status indicator, when system is running, LED lamp D light. When the system is on waiting, LED lamp D off. P1 钉扣机8针快捷按键,当此功能开启时按键上方LED亮起,钉扣机将运行在8针模式.(可与16针32针配合切换使用) Button sewing machine 8-pin shortcut keys, When the function open,LED lights on above the key, machine will run 8-pin mode. (Can with 16-pin or 32-pin switchable) P2 钉扣机16针快捷按键,当此功能开启时按键上方LED亮起,钉扣机将运行在16针模式.(可与8针32针配合切换使用) Button sewing machine 16-pin shortcut keys, When the function open,LED lights on above the key, machine will run 16-pin mode. (Can with 8-pin or 32-pin switchable) P3 钉扣机32针快捷按键,当此功能开启时按键上方LED亮起,钉扣机将运行在32针模式.(可与8针16针配合切换使用) Button sewing machine 32-pin shortcut keys, When the function open,LED lights on above the key, machine will run 32-pin mode. (Can with 8-pin or 16-pin switchable) P4 拨线快捷按键,功能开启时按键上方LED亮起,功能关闭时按键上方LED熄灭. Wiper shortcut keys,When the function open,LED lights on above the key,When the function close the LED off. P5 钉扣针数自定义键,点动()键,屏幕显示n-08,后面08在闪烁此时点动()()按键可直接调整针数,调整完毕后点动()键将保存当前针数并运行自定义针数模式. Button sewing Pin Defined Button, Touch (), Screen display n-08, after the number twinkling,touch ()()can adjust the pin number, after finish touch () to save the number and running the defined Button mode. P6 机头LED灯开关按键,当按键上方LED灯亮起时表示机头LED灯开启,当按键上方LED灯熄灭时表示机头LED灯关闭. Head LED light switch button. The LED on means head LED lamp is on, otherwise it Off. P7 钉扣机开机复位按键,每次开始必须进行一次复位动作后方能运行. Machine Power reset button,when open the machine power, should be touch the reset one time, then can run the machine.