DOC《机制木炭又名机制炭,人造炭、再生炭、无烟清洁炭,是以机...》

机制木炭又名机制炭,人造炭、再生炭、无烟清洁炭,是以机制木炭木质碎料挤压加工成的炭质棒状物.

源于日本,产品称 木力亏仆 ,后经台湾传入大陆.英文译名为 machine--made charcoal .棒炭原料来源广泛,稻壳、花生壳、棉壳、玉米芯、玉米秆、高粱秆、豆秆、锯末、木屑、刨花、松粒壳、椰子壳等皆可用作原料生产棒炭,以锯末、刨花、竹屑、稻壳为最佳.棒炭市场广阔.饭店用作烧烤用炭,棒炭密度是木炭的3倍以上,燃烧无烟,工业上,棒炭用于生产二硫化炭和钢铁冶炼.棒炭还用作锅炉的补充燃料,它的密度与煤相近,热值为5500--9000大卡/KG,但灰份明显低于煤炭.机制木炭主要特点:密度大,热值高,无烟、无味、无污染、不爆炸、易燃,是国际上公认的绿色环保产品. ? ? ????用途:

1、冶金(炼铁还原剂、炼铝用电极、钢锭保温剂);

2、化工(用于生产二硫化碳、碳化钙、四氯化碳等);

3、建筑(混凝土特殊填料、绝缘材料、耐火材料等);

4、农村园艺(改良土壤、保护水土、熏炒茶叶等);

5、畜牧业(饲料掺合剂、畜拦除臭);

6、生活燃料(取暖、烘烤食品、火锅等). 产品包装:10斤纸箱包装、15斤纸箱包装、20斤纸箱包装;

可根据客户要求定做. 本产品属于易碎品,在运输的途中难免会压碎和压断,请注意! 机制木炭市场前景: 机制木炭在餐饮(烧烤、火锅、烤肉等)业作烧烤用炭,机制木炭密度是木炭的3倍以上,燃烧无烟,工业上,机制木炭用于生产二硫化炭和钢铁冶炼.棒炭还用作锅炉的补充燃料,它的密度与煤相近,热值5500-7000大卡/KG,但灰份明显低于煤炭. 机制木炭的市场广阔:饭店、工厂、农业、畜牧业、冶金、环保、实验等! Mechanism charcoal <

http://baike.baidu.com/view/281984.htm >

and <

http://baike.baidu.com/view/79349.htm >

of mechanism charcoal, rods, artificial, renewable carbon, clean smokeless charcoal, is wood broken material extrusion processing of carbon rod. Stick charcoal raw material sources, rice husk, peanut shell, cotton shell, corn cob, corn stalks, sorghum stalk, bean stalk, sawdust, wood chips, wood shaving, loose grain of shell, coconut shell, etc all can be used as a raw material to produce charcoal, sawdust, wood shavings, bamboo shavings, rice husk is the best. Mechanism charcoal is what kind of? Usually about

5 cm in diameter of quadrangle, hexagonal and round three, the length can be any interception, general is

8 up to

50 cm in length, there is a small hole, in terms of ventilation with! Mechanism charcoal used originally for sawdust and bamboo shavings, usually by the high temperature and high pressure extrusion molding machine, special raw materials before use, of course, is to use the dryer drying the moisture content below 10% only! Many people think that rice husk, peanut shell, corn cob, corn stalks, sorghum stalk etc also can be calcined into charcoal, is yes, with these material can be compressed into stick, can'

t carbonized into charcoal! Why is that? Because these materials contain fiber structure and different elements are different, make after use grey powder the rest of the lot, the combustion value is low, the fire is not big enough! Mechanism charcoal key features: Density, high calorific value, smoke-free, tasteless, no pollution, not explosive, flammable, is internationally recognized as a green environmentally friendly products. Charcoal quality indicator for: HanTanLiang >

85% and <

5% and >

8000 calories of calorific value, ash volatilization of <

15%, water <

4%, without impurities, burning time >

3 hours, Appearance: Charcoal show hexagonal or corners, commonly inside the round hole of the black bar, carbon between

37 to

40 mm diameter aperture <

15 mm Purpose: 1. Metallurgical industry Charcoal is used for smelting iron ore, metallurgical industry before charcoal smelting of pig iron and coke, even if the same chemical composition, the structure and mechanical properties is still not the same. Charcoal smelting iron in general with fine structure, casting, no crack characteristics, use charcoal production of pig iron contains less impurities, suitable for production of high quality steel. Because charcoal is reducing, so in the metallurgical industry can be used to restore the ore smelting metal. In non-ferrous metal production, charcoal is used for the surface flux, while non-ferrous metal melting, flux on the surface of the molten metal surface protective layer formation, make metal is separated from gas medium, as well as reduce molten metal splash damage, and can reduce the saturation of the gas in the melt. 2. Made of carburizing agent All required surface has high hardness and wear resistance, and the center has good toughness of all steel products to carburizing. Used to carburizing steel carbon compounds known as carburizing agent. Simple charcoal carburizing effect is poorer. Therefore commonly used charcoal as raw material, add a certain amount of contact agent, made of carburizing agent. 3. The carbon sulfide production Charcoal is one of the best raw material for manufacturing carbon disulfide, used in the manufacture of carbon disulfide charcoal, is supposed to be hard, small volume, ash and moisture content, fixed carbon content is high. Production

1 ton carbon disulfide about 0.5 tons of charcoal. 4. Charcoal brick repression Broken charcoal transport is not very convenient, and the use is restricted, with suppression of charcoal brick method can make the value of the small pieces of charcoal into high quality fuel. Charcoal brick has a small hygroscopicity and water absorption, specific gravity, and the advantage of high calorific value, but also in use process has high mechanical strength. Burnt bricks in burning the charcoal smoke-free, no carbon dust. Charcoal brick can be used for metallurgy, portable gasifier, etc. ... Mechanism charcoal, we usually referred to as regeneration mechanism charcoal, charcoal, man-made carbon, green charcoal, anthracite coal, etc. Mechanism charcoal was first developed by Japan, the product called wood strength loss servant , and send to Taiwan, and then go to the mainland! Other is introduced Mechanism charcoal because after high temperature high pressure, so the density is very big, is generally

2 to

3 times the size of lumber, is also a natural charcoal about three times! More of a peat, coke

4 to

5 t........