编辑: sunny爹 | 2019-07-01 |
7―1999续输送设备 散粒物料堆积角的测定代替ZB J8
1 006.7―88 《 续输送设备 散粒物料堆积角的测定》 JB/T 9014.7-1999 continuous conveyor equipment particle materials accumulation Angle measurement instead of ZB J8 1-88-006.7《 the continuous conveying equipment particle materials bulk Angle measurement》 二.适用范围Scope of Application: 标准规定了散粒物料堆积角的测定方法;
适用于连续输送设备输送的粒度为 0~50mm的散粒物料的自然堆积角和动态堆积角的测定. the method of determination of the accumulation Angle of particle material is stipulated in the standard.It is suitable for the determination of natural accumulative Angle and dynamic accumulation Angle of the particle material of
0 ~ 50mm for continuous conveying equipment. 三.原理Principle: 在一定的试验条件下,测定物料的自然堆积角和动态堆积角,以供确定物料的流动性级别和计算物料的内摩擦系数. under certain experimental conditions, test the natural accumulation Angle and dynamic accumulation Angle, to determine the The flow level and calculate the internal friction factor of the material. 四.技术参数要求:Technical Parameters 粒度小于6mm 的物料采用堆积角、逆止角测定仪进行测定 Particle size less than 6mm of the material using the accumulation angle, reverse angle instruments for measuring. 振动平台:采用磁振动方式;
半波模式下最大振幅为0.5mm,频率为0-250Hz-任意可调节. Vibration platform: the use of magnetic vibration mode;
half wave mode maximum amplitude of 0.5mm, frequency of 0-250Hz- can be adjusted arbitrarily. 堆积平板Stacked plate:直径iameter1M 下料口距离平板间距250mm可调节;
下料口直径50mm,料筒内径:300mm The distance between the feed opening and the plate is 250mm which is adjustable, the feed opening diameter is 50mm, barrel inner diameter: 300mm 料筒出口有控制阀门Barrel outlet has control valve. 6.计时器:0-9999H/M/S可任意设定 Timer: 0-9999H/M/S can be arbitrarily set 7.配置辅助工具:游标卡尺、角度尺、料盘、料铲、铁锹、钢板尺、毛刷、金属丝刷 Configuration auxiliary tools: vernier caliper, angle ruler, material tray, feeding shovel, spade, steel plate ruler, brush, wire brush 8. 粒度大于6mm 的物料采用人工堆积法进行测定 Materials with a particle size greater than 6mm were measured by artificial bulkmethod. 9.输入power supply:220v 10.环境要求:建议在无尘空间使用,常温状态 Environmental requirements: recommended for use in clean spaces, room temperature. 粉体综合分析解决方案: FT-3400粉体流动行为分析仪(静态力学,剪切法) FT-7100粉体流动测试仪(动态力学,转鼓法或旋转圆筒法) FT-3900粉末屈服强度分析仪(单轴压缩法) FT-3500粉体压缩强度测试仪(可压性,压缩方程) FT-2000智能颗粒和粉末特性分析仪系列(传统方法) FT-301系列智能粉末电阻率测试系统(电性能) ROOKO瑞柯品牌 -------专注于粉体&新材料测量与分析仪器解决方案?? ----解决粉体表征: 流与不流分析? ;
粒度;
水分;
体积分析;
电导性、静电电荷分析. ----我们一直在做: 研发、生产、销售、租赁、实验室样品分析及后延扩展服务.