编辑: sunny爹 | 2019-09-26 |
99 (E), the technical requirements for" the measurement of the bulk density of the abrasive material, the second part: micropowder" 工作原理将待测的微粉装入漏斗,微粉在自身的堆积作用下处于稳定状态.
当电磁振荡器启动后,微粉在电磁振动的作用下,以特定的方式和途径流入测量桶中,将落入到测量筒中的微粉刮平,在天平上称取刮平后测量筒中的微粉质量,再除以测量筒的容积,就可以测出待测微粉的堆积密度 Working principle : Place the tested micropowder in the funnel, and the micropowder will be stable under its own accumulation.When start the electromagnetic oscillator, under the action of electromagnetic vibration, micro powder will follow into the measurement cylinder in particular ways and methods, Scrape the micropowder which in measuring cylinder and make it leveling , weight the micropowder left in the measurement cylinder after leveling on the balance scale , then divided by the volume of measuring cylinder, your can measure the bulk density of powder under test 二.技术参数Technical Parameters: 漏斗材质:不锈钢;
Funnel material: stainless steel;
漏斗尺寸:高度290mm;
上口直径190mm;
出料口内径:28mm;
出料口高度:38mm Funnel size: height 290mm, upper diameter 190mm, outlet inner diameter: 28mm, outlet height: 38mm 振动槽材质:不锈钢Vibrating trough material: stainless steel 振动槽尺寸:(210mm*40mm*30mm)±1mm Vibrating trough dimensions: (210mm*40mm*30mm)±1mm 测量筒尺寸:内径64mm;
内高度62.2mm Measuring cylinder dimensions: inner diameter 64mm, inner height 62.2mm. 测量筒容积: (200±0.5) cm3 Measuring cylinder volume: (200±0.5) cm3 测量误差:≤±0.02g/cm3 Measurement error: ≤±0.02g/cm3 漏斗下口内径:28mm;
量筒容积:200ml ;
漏斗出料口高度:38mm;
被测微粉下落高度:140mm. The inner diameter of funnel lower opening:28mm, cylinder volume: 200ml, funnel outlet height: 38mm, the dropping height of the measured powder: 140mm. 粉体综合分析解决方案: FT-3400粉体流动行为分析仪(静态力学,剪切法) FT-7100粉体流动测试仪(动态力学,转鼓法或旋转圆筒法) FT-3900粉末屈服强度分析仪(单轴压缩法) FT-3500粉体压缩强度测试仪(可压性,压缩方程) FT-2000智能颗粒和粉末特性分析仪系列(传统方法) FT-301系列智能粉末电阻率测试系统(电性能) ROOKO瑞柯品牌 -------专注于粉体&新材料测量与分析仪器解决方案?? ----解决粉体表征: 流与不流分析? ;
粒度;
水分;
体积分析;
电导性、静电电荷分析. ----我们一直在做: 研发、生产、销售、租赁、实验室样品分析及后延扩展服务. 研发、生产、销售、租赁、实验室样品分析及后延扩展服务.