PDF《HD7751》

1 Put the mains plug in the wall socket. - The start/standby button lights up.

2 Press the start/standby button (Fig. 2). - The display lights up and the appliance beeps. If you do not press any button within

5 minutes, the appliance returns to standby mode and only the start/standby button remains on. Press any button to reactivate the appliance.

7 English

3 Open the water reservoir lid. Fill the water reservoir with fresh cold water up to the 10-cup indication (Fig. 3). Note: Do not put coffee beans or pre-ground coffee in the water reservoir.

4 Close the water reservoir lid.

5 Put the glass jug in the appliance (Fig. 4). - Note: Make sure that the lid is on the glass jug and that the glass jug is properly placed on the hot plate. The spout of the glass jug has to face forward into the appliance. If the lid is not on the glass jug or the glass jug is not properly placed, the drip stop function is automatically activated.

6 Press the start/standby button (Fig. 2). - The appliance beeps and the freshness indicator (cup symbol) appears on the display.

7 Press the pre-ground coffee button to switch off the grinder (Fig. 5). - The pre-ground coffee button lights up. Note: When you switch off the grinder, the number of cups and the strength setting are not shown on the display.

8 Press the start/standby button to start the brewing process (Fig. 2).

9 Let the appliance operate until all the water has flowed into the glass jug. - The coffeemaker produces

5 beeps when the brewing process is finished.

10 Press the start/standby button to stop the brewing/keep-warm process (Fig. 2).

11 Empty the glass jug. Using the appliance Filling the water reservoir

1 Open the water reservoir lid and fill the water reservoir with the required amount of cold water (Fig. 3). There are indications for

2 to

10 cups (275ml to 1375ml) on the water-level window. You can use these indications to determine how much water to put in the water reservoir. Keep in mind that the amount of brewed coffee will be slightly less, since ground coffee absorbs water. Tip: Use the glass jug to fill the water reservoir with the required amount of water. Note: Do not fill the water reservoir beyond the 10-cup indication, otherwise water spills from the opening at the back (Fig. 6). Do not open the water reservoir when the appliance is grinding or brewing. Using coffee beans Warning: Always keep the water reservoir lid closed when you fill the coffee bean container with coffee beans. Otherwise coffee beans can fall into the water reservoir and block up the water inlet.

1 Press the open button on the right-hand side of the coffeemaker to open the filter basket holder (Fig. 7).

2 Place a paper filter (no. 4) or the permanent filter in the filter basket to collect the ground coffee (Fig. 8).

3 Close the filter basket holder.

8 English

4 Remove the coffee bean container lid (1) and fill the container with coffee beans (2). Make sure that there are enough coffee beans in the container for the amount of coffee you want to brew (Fig. 9). Note: Always make sure the bean container is at least half full. Warning: The maximum capacity of the coffee bean container is 250g. To prevent the grinder from jamming, do not exceed this amount. Warning: To prevent the grinder from jamming, do not use unroasted or caramelized beans. Use coffee beans instead of espresso beans, as espresso beans may damage the grinder.

5 Turn the grind selection knob to select the desired type of grind (from fine to coarse). There are nine grind settings (Fig. 10). Tip: We advise you to experiment with the different grind settings to find out which setting you prefer.