PDF《HD7751》

6 To select the number of cups, press the cups button as many times as the desired number of cups (Fig. 11). - The cups button lights up briefly and the appliance beeps. The selected number of cups appears on the display. Note: Make sure that the number of cups you select with the cups button is consistent with the amount of water in the water reservoir. Please keep in mind that the coffeemaker uses all the water in the water reservoir. If you select a number of cups that is smaller than the amount of water, the coffee becomes weaker than you intended.

7 Press the strength button once or several times until the desired coffee strength is selected (mild, medium or strong (Fig. 12)). - When you press the strength button, it lights up briefly and the appliance beeps. The display shows the selected coffee strength.

8 Press the start/standby button (Fig. 2). - The appliance beeps and the display lights up.

9 Press the start/standby button again to start the brewing process (Fig. 2). Warning: Keep away from the steam vent during brewing, as hot steam escapes through the vent. - The grinder grinds the required amount of coffee beans. - The freshness indicator (cup symbol) flashes rapidly on the display until the brewing process is finished (Fig. 13). - The coffeemaker beeps

5 times when the brewing process is finished.

10 Wait until the coffeemaker has stopped beeping before you remove the glass jug. Note: After brewing, coffee drips from the filter basket for several seconds. - The freshness indicator (cup symbol) flashes slowly on the display for

120 minutes after brewing, to indicate that the coffee is fresh (Fig. 13). Using pre-ground coffee If you want to use pre-ground coffee instead of coffee beans, follow the steps below.

1 ........