PDF《GC3300 SERIES》

1 for synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

1 for silk

2 for wool

3 for cotton and?linen If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that?is not visible when you wear or use the article. Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.To prevent stains, do not use the spray function. Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibres.

3 Plug in the appliance. If the appliance has an earthed plug, put the mains plug in an earthed wall socket. The amber temperature light goes on?(Fig.?6).

4 When the temperature light goes out, wait a while before you start?ironing. The temperature light?goes on from time to time during ironing. Using the appliance Note:The iron may give off some smoke when you use it for the first time.This stops after a short while. Steam ironing

1 Make sure that there is enough water in the water tank.

2 Set the recommended ironing temperature (see chapter '

Preparing for use'

, section '

Setting the temperature'

).

3 Set the appropriate steam setting. Make sure that the steam setting?is suitable for the set ironing temperature:?(Fig.?7)

1 -

2 for moderate steam (temperature settings

2 to 3)

3 -

4 for maximum steam (temperature settings

3 to MAX) Note:The iron starts to produce steam as soon as it has?reached the set?temperature. Note: If the selected ironing temperature is too low (MIN to 2), water may drip from the soleplate (see chapter '

Features'

, section '

Drip stop'

). Ironing without steam

1 Set the steam control to position

0 (= no steam)?(Fig.?3).

2 Set the recommended ironing temperature (see chapter '

Preparing for use'

, section '

Setting the temperature'

). Features Spray function You can use the spray function at any temperature to moisten the article to be ironed.This helps remove stubborn creases.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be ironed?(Fig.?8). - - - - , - - Steam boost A powerful steam boost helps to remove very stubborn creases. The steam boost function can only be used at temperature settings between

2 and MAX.

1 Press and release the steam boost button?(Fig.?9). Concentrated steam boost from the special SteamTip?(specific types only) The concentrated steam boost?from the long vents in the SteamTip?enhances the distribution of steam into every part of your garment.The concentrated steam boost function can only be used at temperature settings between

2 and MAX.

1 Press and release the steam boost button?(Fig.?10). Vertical steam boost You can also use the steam boost function?when you hold the iron in vertical position.This is useful for removing creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and release the steam boost button?(Fig.?11). Never direct the steam at people. Drip stop (specific types only) This iron is equipped with a drip-stop function: the iron automatically stops producing steam when the temperature is too low, to prevent water from dripping out of the soleplate.When this happens you may hear a sound. Automatic shut-off function (specific types only) The automatic shut-off function automatically switches off the iron if it has not been moved for a while. The red auto-off indication of the temperature light flashes to indicate that the iron has been switched off by the automatic?shut-off function?(Fig.?6). To let the iron heat up again: