PDF《Protection Device》

Power Management & Multimarket Data Sheet Revision 1.

4, 2014-10-23 Final ESD110-B1 Series Bi-directional, 18.5 V (AC), 0.3 pF, 0201, 0402, RoHS and Halogen Free compliant ESD110-B1-02ELS ESD110-B1-02EL Protection Device TVS (Transient Voltage Suppressor) Edition 2014-10-23 Published by Infineon Technologies AG

81726 Munich, Germany ?

2014 Infineon Technologies AG All Rights Reserved. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com) Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ESD110-B1 Series Product Overview Final Data Sheet

3 Revision 1.4, 2014-10-23

1 Product Overview 1.1 Features ? ESD / transient protection according to: C IEC61000-4-2 (ESD): ±15 kV (air), ±12 kV (contact) C IEC61000-4-5 (Surge): ±2 A (tp =

8 /

20 ?s) ? Bi-directional, working voltage up to VRWM = ±18.5 V (AC) ? Ultra-low capacitance: CL = 0.3 pF (typical) ? Low clamping voltage: VCL =

28 V (typical) at ITLP =

16 A ? Very low reverse current: IR <

1 nA (typical) ? Pb-free (RoHS compliant) and halogen free package 1.2 Application Examples ? ESD Protection of RF signal lines in Near Field Communication (NFC) applications 1.3 Product Description Figure 1-1 Pin Configuration and Schematic Diagram Table 1-1 Part Information Type Package Configuration Marking code ESD110-B1-02ELS TSSLP-2-4

1 line, bi-directional X ESD110-B1-02EL TSLP-2-20

1 line, bi-directional XX PinConf_and_SchematicDiag.vsd Pin

1 Pin

2 Pin

1 Pin

2 Pin

1 marking (lasered) ESD110-B1 Series Maximum Ratings Final Data Sheet

4 Revision 1.4, 2014-10-23

2 Maximum Ratings Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings;

exceeding only one of these values may cause irreversible damage to the integrated circuit.

3 Electrical Characteristics at TA =

25 °C, unless otherwise specified Figure 3-1 Definitions of electrical characteristics Table 2-1 Maximum Ratings at TA =

25 °C, unless otherwise specified1) 1) Device is electrically symmetrical Parameter Symbol Values Unit ESD air discharge2) ESD contact discharge2) 2) VESD according to IEC61000-4-2 VESD ±15 ±12 kV Peak pulse power3) PPK

58 W Peak pulse current3) 3) Non-repetitive current pulse 8/20?s exponential decay waveform according to IEC61000-4-5 IPP ±2 A Operating temperature TOP -40 to

125 °C Storage temperature Tstg -55 to

150 °C ( )!! %! )* ! +! )#! % ##%# ESD110-B1 Series Electrical Characteristics at TA =

25 °C, unless otherwise specified Final Data Sheet

5 Revision 1.4, 2014-10-23 Table 3-1 DC Characteristics at TA =

25 °C, unless otherwise specified1) 1) Device is electrically symmetrical Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Reverse working voltage VRWM -18.5 C 18.5 V for AC voltages (NFC) -15 C

15 for DC voltages Trigger voltage Vt1

20 C C V Holding voltage Vh

20 21

26 V TA =

25 °C, IT = 0.5 mA C

19 C TA =

125 °C, IT = 0.5 mA Reverse leakage current IR C