PDF《GB 5310-2008 pipe specification》

Sunny Steel Enterprise Ltd.

Collect Steel pipe and fitting Resources Http://www.sunnysteel.com E-mail: [email protected] Page:1 of GB5310-2008 pipe specification.docx GB 5310-2008 pipe specification Seamless tubes for making steam boiler whose pressure is high or higher and seamless tubes used as pipelines. GB 5310-

2008 is a national standard specifies classification, code name, dimension, shape, weight, technical requirements, specimen, test methods, test rules, packaging, mark and quality certificate. GB 5310-

2008 standard is applicable to seamless tubes for making steam boiler whose pressure is high or higher and seamless tubes used as pipelines. 20MnG high pressure boiler pipe is a high manganese carbon carburizing steel, the harden-ability, strength and plasticity than

20 steel cutting performance also improved, good low temperature impact toughness and weld-ability. Used to manufacture camshafts, gears, couplings, hinges, pin tow bar, crankshaft bearing rings. High pressure boiler pipe is a boiler tubes are seamless steel pipe category. The method of manufacturing seamless pipes is the same, but there are strict requirements for steels used in manufacturing of tube. High pressure boiler tubes when used often in high temperature and high pressure conditions, under the action of the tube in the high temperature flue gas and water vapor will occur oxidation and corrosion. Steel pipe with high rupture strength, high resistance to oxidation corrosion and good organizational stability. High pressure boiler tube is mainly used to make high-pressure and ultra-high pressure boiler superheater tubes, reheater tubes, windpipe, main stream pipe. Sunny Steel Enterprise Ltd. Collect Steel pipe and fitting Resources Http://www.sunnysteel.com E-mail: [email protected] Page:2 of GB5310-2008 pipe specification.docx 高压锅炉管 GB5310-2008 是用于制造各种结构低高压锅炉过热蒸汽管、沸水管及机车锅炉用过热蒸汽管、大 烟管、小烟管和拱砖管用的优质碳素结构钢热轧和冷拔(轧)无缝钢管. GB5310-2008《高压锅炉 用无缝钢管》的规定. 主要钢级牌号 20G, 20MnG, 25MnG, 15MoG, 20MoG, 12CrMoG, 15CrMoG(T12/P12), 12CrMoG, 12Cr2MoWVTiB. (经协商,也可供应其他特殊牌号的钢管) Chemical Compositions(%) of GB 5310-2008 Steel grade C Si Mn P S Cr Mo 20G 0.17-0.24 0.17-0.37 0.35-0.65 ≤0.030 ≤0.030 ≤0.25 ≤0.15 20MnG 0.17-0.24 0.17-0.37 0.70-1.00 ≤0.030 ≤0.030 ≤0.25 ≤0.15 25MnG 0.18-0.24 0.17-0.37 0.80-1.10 ≤0.030 ≤0.030 ≤0.25 ≤0.15 15CrMo 0.12-0.18 0.17-0.37 0.40-0.70 ≤0.030 ≤0.030 0.80-1.10 0.40-0.55 12Cr2MoG 0.08-0.15 ≤0.50 0.40-0.70 ≤0.030 ≤0.030 2.00-2.50 0.90-1.20 12Cr1MoV 0.08-0.15 0.17-0.37 0.40-0.70 ≤0.030 ≤0.030 0.90-1.20 0.25-0.35 12Cr2MoWVTiB 0.08-0.15 0.45-0.75 0.45-0.65 ≤0.030 ≤0.030 1.60-2.10 0.50-0.65 10Cr9Mo1VNb 0.08-0.12 0.20-0.50 0.30-0.60 ≤0.020 ≤0.010 8.00-9.50 0.85-1.05 Steel Grade Cu Ni V Al W Ti Nb 20G ≤0.20 ≤0.25 ≤0.08 20MnG ≤0.20 ≤0.25 ≤0.08 25MnG ≤0.20 ≤0.25 ≤0.08 15CrMo ≤0.20 ≤0.30 12Cr2MoG ≤0.20 ≤0.30 12Cr1MoV ≤0.20 ≤0.30 0.15-0.30 12Cr2MoWVTiB ≤0.20 ≤0.30 0.28-0.42 0.30-0.55 0.08-0.15 B 0.002-0.008 10Cr9Mo1VNb ≤0.20 ≤0.40 0.18-0.25 ≤0.015 0.06-0.10 Sunny Steel Enterprise Ltd. Collect Steel pipe and fitting Resources Http://www.sunnysteel.com E-mail: [email protected] Page:3 of GB5310-2008 pipe specification.docx 外观质量 钢管内外表面不允许有裂缝、折叠、轧折、结疤、离层和发纹. 这些缺陷应完全清除掉. 清除深度不得超过公称壁厚的负偏差,其清理处实际壁厚不得小于壁厚所允许的最小值. Mechanical Properties of GB5310-2008 Steel Grade Yield Strength (Mpa) Tensile Strength (Mpa) Elongation (%) 20G 410-550

245 24 20MnG ≥415

240 22 25MnG ≥485

275 20 15MoG 450-600

270 22 12CrMoG 410-560

205 21 12Cr2MoG 450-600

280 20 12Cr1MoVG 470-640

255 21 12Cr2MoWVTib 540-735

345 18 10Cr9Mo1VNb ≥585 ≥415 ≥20 The W.T. tolerance of GB5310-2008 W.T.(S) Tolerance of W.T.

20 D