PDF《承认书》

承认书Specification for approval 客户名称: Customer 立创电子 产品名称: Description: 220-2S-2x40P H=4.

3mm 镀金 1u (2.0 普通双排母) 客户料号: Customer part no: C138806 灿科盟产品编号: CKM P/N: 22020080P00CKMT 承认书编号: Approval sheet NO.: SA150431718 承认日期: Approval date: 2017-11-17 客户确认CUSTOMER APPROVED 核准APPROVED 审核ENGINEER 经办CHECK 刘力 2017/11/17 敬请盖印承认规格之后,将一份交回给本公司,谢谢! Please return 1sets of this form to confirm your approval of the product specification thank you! 深圳市灿科盟实业有限公司 工厂地址:深圳市光明楼村鲤鱼水工业区鑫博盛科技园 B 栋四楼 联系

电话:0755-81488157

28154692 13316859588 传真:0755-83425987 Http://www.Ckmtw.com.cn E-mail:[email protected] 业务负责人:

1 深圳市灿科盟实业有限公司 产品规格书PRODUCT SPECIFICATION 2.0mm Female Header SERIES 内容:此规格书包含 2.0mm 排母接插件系列. Scope: This specification covers the 2.0mm Female Header spacing Connector series. Index: Page 1. 产品名称及料号/Product name and part number

2 2. 额定电压电流/Ratings

2 3. 特性测试/Performance 3-1.电气特性/Electrical performance

2 3-1-1.接触阻抗/Contact resistance

2 3-1-2.绝缘阻抗/Insulation resistance

2 3-1-3.高压测试/Dielectric strength

2 3-2.机械特性/Mechanical performance 3-2-1. 端子与塑胶保持力/ Contact retenting force in insulator

2 3-2-2.单PIN 插入力/Pin Insertion force

2 3-2-3.单PIN 保持力/Pin retention force

2 3-3.环境特性测试/Environmental performance and others 3-3-1.整组插拔测试后接触阻抗/Repeated insertion/withdrawal

3 3-3-2.温升测试/Temperature rise

3 3-3-3.震动测试/Vibration

3 3-3-4.冲击测试/Shock

3 3-3-5.耐热测试/Heat resistance

3 3-3-6.低温测试/Cold resistance

3 3-3-7.恒温恒湿/Humidity

3 3-3-8.温度冲击测试/Temperature cycling

3 3-3-9.盐水喷雾测试/Salt spray

3 3-3-10.沾锡性测试/Solderability

4 3-3-11.焊热性测试/Resistance to soldering heat

4 3-3-12 寿命测试/Life Test

4 4. 产品规格尺寸及材质/Product shape, dimensions and materials

4 Note::以上测试视公司之测试条件/能力而定. FILE NO ENS017 APPROVAL CHECK DRAWING ECR/N NO New spec

2 1. 产品名称及料号/Product name and part number Product Name Part Number Name 名称 220-2S-1*XP (单排直针) 220-2R-1*XP (单排弯针) 220-2S-2*XP (双排直针) 220-2R-2*XP (双排弯针) 2. 额定电压电流及使用温度范围/Ratings and Ambient Temperature ITEM STANDARD Rated Voltage(Max) 额定电压 / Rated Current(Max) 额定电流 1.5A Ambient Temperature 使用温度范围 -40℃-+105℃ 3. 特性测试/Performance 3-1.电气特性/Electrical performance ITEM Test condition Requirement 3-1-1 Contact Resistance 接触阻抗 Mate connectors, reassure by dry circuit ,20mV MAX,10mv.(Based upon JIS C5402 5.4) 将公母对插,二头接上微电流电压测试. 0.02 欧(MAX) 3-1-2 Insulation resistance 绝缘阻抗 Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method

302 condition B) 将公母对插,二头接上电压测试

1000 兆欧(MIN) 3-1-3 Dielectric strength 高压测试 Mate connectors, apply 500V AC for

1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301) 将公母对插,相邻的二支端子接上高压测试 No breakdown and flashover 没有损坏/没有电弧 产生 3-2.机械特性/Mechanical performance ITEM Test condition Requirement 3-2-1 Contact retenting force in insulator 端子与塑胶保持 力Retention speed 25±3mm per minute form housing 将端子从塑胶中拔出,测试拔出值 0.4kg Min. 3-2-2 Single Pin contact Insertion force 单PIN 插入力 Measure fore to insertion using 0.50mm square pin at speed 25±3mm per minute 用0.50mm 方针,以每分钟 25±3mm 速度插入排 母 测试插入值 0.6kg Max. 3-2-3 Single Pin contact withdrawal force 单PIN 拔出力 Measure fore to withdrawal using 0.50mm square pin at speed 25±3mm per minute 用0.50mm 方针,以每分钟 25±3mm 速度拔出排 母 测试拔出值 0.02kg Min.

3 3-3.环境特性测试/Environmental performance and others ITEM Test condition Requirement 3-3-1 Repeated insertion/ withdrawal When mated up to

30 cycles repeatedly by the rate of

10 cycles per minute 三十次插拔后,测量接触阻抗 Contact Resistance 接触阻抗 40mΩ MAX 3-3-2. Temperatur e Rise 温升 Carrying rated current load(Based upon UL1977 针对额定电流以作测试 30℃ MAX 3-3-3 Vibration 震动测试 Amplitude:1.52mm P.P C调幅 Sweep time:10-55-10Hz in

1 minute 频率 Duration:2 hours in each X.Y.Z axlals 震动 时间 (based upon MIL-STD-202 method 201) Appearance No Damage Contact Resistance 40mΩ MAX Discontinuity 不连续性 1u sec MAX 3-3-4 Shock 冲击测试 50G3strokes in each X.Y.Z. axlals. (based upon JIS C0041) 50G 力量,XYZ 轴分别三次冲击. Appearance No Damage Contact Resistance 40mΩ MAX Discontinuity 不连续性 1u sec MAX 3-3-5 Heat Resistance 耐热测试 105±3℃,96hours (based upon JIS C5402 7.8) 时间

96 小时,温度 105±3℃ Appearance No Damage Contact Resistance 40mΩ MAX 3-3-6 Cold Resistance 低温测试 -40±3℃,96hours (based upon JIS C5402 7.9) 时间

96 小时, 温度-40±3℃ Appearance No Damage Contact Resistance 40mΩ MAX 3-3-7 Humidity 恒温恒湿测试 Temperature:40±2℃,Relative humidity:90~95%(RH) (Based upon MIL-STD-202 Method 103B conditions.B) 温度 40±2℃,湿度 90~95%,时间

96 小时. Appearance No Damage Contact Resistance 40mΩ MAX Dielectric strength 没有 损坏 /没 有电弧产生 3-3-8 Temperatur e cycling 温度冲击测试

5 cycles: 1>.-40℃

30 minutes. 2>.+85℃

30 minutes. 3>.+25℃

30 minutes. 4>.+105℃

30 minutes Appearance No Damage Contact Resistance 40mΩ MAX

4 3-3-9 Salt spray 盐水测试

24 hours exposure to a salt spray from the 5±1% solution at 35±2℃.(Based upon JIS C5402/MIL-STD-202method 101D conditions. B) 时间

24 小时,盐水体比例 5±1%,温度 35±2℃. Appearance No Damage Contact Resistance 40mΩ MAX 3-3-10 Solderabi lity 沾锡性测试 Soldering time:3±0.5sec, solder temperature:230±5℃ 时间:3±0.5 秒, 温度:230±5℃ 95%以上沾锡面积 3-3-11 Resistance to soldering heat 焊热性 测试 Soldering time:5±1sec, solder temperature:260±5℃ 时间:5±1 秒, 温度:260±5℃ No Damage 外观没有影响 3-3-12 Life Test 寿命测试1000 cycles

1000 次No Damage 外观,功能没有影响 4. 产品规格尺寸及材质/Product shape, dimensions and materials (见附件图纸)