PDF《PTC》

Material Data Sheet Date IMDS ID if available Version Product Part (IMDS: semi component) Material Class (IMDS: Material) Material (Classification) VDA

231 Substance TMPS**) [wt%] CAS if applicable typical mass of material [wt-%] Traces see 1) BaTiO3

69 12047-27-7 98,5 PbTiO3

15 12060-00-3 SrTiO3

10 12060-59-2 CaTiO3

5 12049-50-2 others*)

1 Al 90,6 7429-90-5 1,5 Lead-Boro-Silicate 9,4 Sum of total

100 sizes [ mm] weight range [ g ] material numbers sizes [ mm] weight range [ g ] material numbers 14.

5 x 14.5 x 1.4 1.57 B59390R0070B10V3

12 x

2 1.2 B59066A* 27.3 x

13 x 1.1 2.2 B59401R0140B010 28.8 x 9.8 x 2.1 3.5 B59288R*

35 x

4 x 1.62 1.27 B59004R0120B110 28.8 x 9.8 x 2.1 3.5 B59290R*

35 x

4 x 1.62 1.27 B59272R0050B010 30.8 x 39.2 x 1.9 12.8 B59280R*

40 x

12 x 1.8 5.18 B59039D7201U010

35 x 6.2 x

2 2.4 B59102R*

40 x

12 x 1.8 5.18 B59432R0080B010 11,6 x 6,2 x

2 0,82 B59107R*

40 x

12 x 1.8 5.18 B59432R0050B010 17,3 x 6,2 x2 1,22 B59106R* 36.2 x 5.7 x 1.8 2.2 B59105R0090B010

35 x 6,2 x

2 2,47 B59102R* 35.4 x 14.5 x 2.1 6.27 B59356R0180B010

35 x 6,2 x

2 2,47 B59103R* 35.4 x 14.5 x 2.1 6.03 B59356R0195B010

35 x 6,2 x 1,4 1,73 B59115R* 27.4 x13 x 1.1 2.13 B59423R0140B110 17,3 x 6,2 x1,4 0,86 B59116R* 28.8 x 9.8 x 1.1 1.8 B59430R0160B110 11,6 x 6,2 x 1,4 0,57 B59117R* 35.4 x 6.2 x 1.42 1.75 B59139R0165B010

35 x 6,2 x 1,8 2,23 B59145R* 17,3 x 6,2 x2 1,22 B59196R*

35 x 6,2 x

2 2,47 B59193R* 17,3 x 6,2 x 2,2 1,35 B59126R* 11,6 x 6,2 x 3,2 1,31 B59127R* Contact Division Address Tel: +43

3462 800

2139 Ronner Christoph Important remarks: 1) The declaration limit is 0.1% as defined by IEC

62474 (IEC PAS 61906). Traces are product parts, substances etc. that are below a percentage of 0.1 % by weight, if not otherwise regulated. 2) This Material Data Sheet contains typical values of the respective products set forth herein. We expressly point out that all values and statements contained herein are based on our best present knowledge and cannot be regarded as binding statements or binding product specifications, unless otherwise explicitly agreed in writing. EPCOS AG AND ITS AFFILIATES HEREBY EXPRESSLY DISCLAIM ANY REPRESENTATION OR WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY, WITH REGARD TO THE STATEMENTS AND VALUES CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR SUITABILITY FOR ANY PURPOSE. PPD QM

8530 Deutschlandsberg, AUSTRIA mailto: [email protected] *) others: .(not declarable or prohibited substances acc. GADSL) **) typical mass percentage of substance PTC Heating elements B59xxxA/R* (Al) 11.10.2018 Product Class 5.14 Active Part Ceramic 3B Composite 4D Termination Not part of a Product Class Umbrella Specification Rev 5.02.1, based on ZVEI Layout, EPCOS AG, Dr. G. Schulz, Dept. TQ, 08/2014 ?EPCOS AG

2014 Material Data Sheet Date IMDS ID if available Version PTC Heating elements B59xxxA/R* (Al) 11.10.2018 Product Class 5.14 o Exemption 15: Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip Chip packages;

o Other Exemption than above o Exemption

6 (c): Copper alloy containing up to

4 % lead by weight;

o Exemption

7 (a): Lead in high melting temperature type solder (i.e. lead-based alloys containing

85 % by weight or more lead);

? Exemption

7 (c)-I: Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound;

o Exemption

7 (c)-II: Lead in dielectric ceramic in capacitors for a rated voltage of

125 V AC or

250 V DC or higher;

o Exemption

7 (c)-III: Lead in dielectric ceramic in capacitors for a rated voltage of less than

125 V AC or

250 V DC;

o no exemptions;

o Exemption

6 (a): Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0,35 % lead by weight;

o Exemption

6 (b): Lead as an alloying element in aluminium containing up to 0,4 % lead by weight;

The products set forth herein are "RoHS-compatible". RoHS-compatible means that products are compatible with the requirements according to Art.

4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June

8 th ,

2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. RoHS - Exemptions for the Product Class / Product according to Annex III: ( ? valid o not valid ) Umbrella Specification Rev 5.02.1, based on ZVEI Layout, EPCOS AG, Dr. G. Schulz, Dept. TQ, 08/2014 ?EPCOS AG 2014