PDF《User manual》

9 Using the bottle warmer With this bottle warmer, you can quickly warm all Philips Avent feeding bottles and milk/baby food in containers and other baby food jars. Note: Philips Avent breast milk bags and Philips Avent 2oz/60ml bottles cannot be used in this bottle warmer. Explanation of settings - - Off setting: The bottle warmer is switched off and the light is off. On every other setting, the appliance is switched on and the light is lit (Fig.?2). - - Express warming setting: The milk/baby food will be warmed quickly. The bottle needs to be taken out immediately after warming, otherwise the milk will overheat. - - Keep warm setting: Milk is warmed at a slower speed and be kept at right temperature. - - Defrost setting: Defrost a bottle/container of milk/baby food to liquid state. No warming occurs. Using the bottle warmer with express warming setting

1 Put the mains plug in the wall socket?(Fig.?3).

2 Place the bottle or container in the bottle warmer?(Fig.?4).

3 Fill the bottle warmer with drinking water up to the level of the milk/baby food in the bottle/container. In case of large amounts of milk, the maximum level of water is approximately

1 cm below the top of the bottle warmer. An accurate water level ensures correct warming performance?(Fig.?5).

4 Select a position in the express warming area. Consider the beginning of this area as milk content volume up to 180ml and the end of the area as milk content volume over and including

180 ml, see the express warming reference table for you reference ?(Fig.?6). ENGLISH Baby food can also be warmed quickly if you select a position in this area. Make sure to stir and check the food regularly during warming. Be careful not to burn your fingers during stirring. Note: The speed of warming milk/baby food depends on the amount of the milk/baby food warmed and on its initial temperature, i.e. room temperature (20°C) or fridge temperature (5°C).

5 The orange light goes on when you select a setting. This indicates that the bottle warmer is on?(Fig.?8). Note: Whilst warming the milk circulates and heats evenly.

6 Check the express warming reference table for the time required to warm the milk. Remove the bottle/container from the bottle warmer immediately after the warming is finished?(Fig.?9). Caution: Please make sure to check the milk/baby food on a regular basis for temperature during warming. Caution: If you leave the bottle/container in the bottle warmer too long, the milk/baby food may become overheated. Note: Due to the high variety of baby food consistencies, it is strongly recommended to continuously stir and check while you are warming the baby food for an optimal result. Note: If you overheat breast milk, valuable nutrients and vitamins may be lost.

7 Always check the temperature before you feed your baby: - - Milk: Gently shake the bottle or milk storage container and check the temperature of the milk by sprinkling a few drops on the inside of your wrist (Fig.?10). ENGLISH

10 - - Baby food: Stir the baby food thoroughly and test it yourself with a spoon to ensure it is not too hot. If the baby food is not warm enough, put the container back into the bottle warmer and warm the baby food until it has the desired temperature (Fig.?11).

8 Turn the knob back to the '

off'

position. ? The orange light goes off?(Fig.?7)........