PDF《2009-02-26》

4 rows Serial communication port RS-232(COM1) Asynchronous transmission method: RS-232 Data length:

7 or

8 bits, Stop bits:

1 or

2 bits, Parity: None/Odd/Even Baud rate: 9,600bps~115,200bps RS-232:

9 PIN D-SUB male Extension communication port RS-422(COM2) RS-485(COM2) Not supported Asynchronous transmission method: RS-485 / RS-422 Data length:

7 or

8 bits Stop bits:

1 or

2 bits Parity: None/Odd/Even Baud rate: 9,600bps ~ 115,200bps RS-422:

9 PIN D-SUB male RS-485:

6 PIN removable terminal Battery cover DC 3V battery Extension interface The slot for program copy card

6 PIN removable terminal Not supported (3 PIN fixed terminal, DC 24V input) Include DC 24V input and RS-485 communication input Panel component Explanation Alarm LED indicator (RED) Status 1: When power is ON, LED will start to blink slowly Status 2: When the user-defined conditions are met, LED will blink for one second repeatedly along with an alarm sound. Power LED indicator (Green) When the power is connected to the product, LED will be ON. Display area LCM display area. It is used to display current program status. ← Users can re-define its function through operation in user interface. F1 It can be a left direction key (move the cursor to the left) in value input mode. Users can re-define its function through operation in user interface. F2 It can be a left direction key (move the cursor to the left) in value input mode. Users can re-define its function through operation in user interface. F3 It can be a selection key to set the value in value input mode. Users can re-define its function through operation in user interface. F4 It can be a right direction key (move the cursor to the right) in value input mode. Users can re-define its function through operation in user interface. Function keys F5 It can be a right direction key (move the cursor to the right) in value input mode. Users can re-define its function through operation in user interface. Up/Down keys Up: It is used to increase the value or move up one page. Down: It is used to decrease the value or move down one page. Users can re-define its function through operation in user interface. Enter key It is used to input a value or accept a programming command. ? Electrical Specifications Model Spec. TP04G-AL TP04G-AL2 CPU STM32F101 Program memory 256KB flash memory -

4 - Model Spec. TP04G-AL TP04G-AL2 RAM of system 10K Byte 16K Byte External input power 24V (1.7W Max.) Waterproof class of front panel IP66 / NEMA4 / UL Type4 indoor Operating temperature for hardware 0°C ~ 50°C;

20% - 90% RH (non-condensing) Storage temperature for hardware -20°C ~ 60°C Vibration IEC61131-2, IEC 68-2-6 (TEST Fc) 5HzQf