PDF《RSS_RSD》

E-10 www.

recom-electronic.com REV: 0/2009 ECONOLINE DC/DC-Converter Selection Guide Part Input Output Output Efficiency Number Voltage Voltage Current SMD (3kV) (VDC) (VDC) (mA) (%) RSS**-xx3.3 (H) 3.3, 5, 12, 15,

24 3.3

303 75 RSS**-xx05 (H) 3.3, 5, 12, 15,

24 5

200 70-78 RSS**-xx09 (H) 3.3, 5, 12, 15,

24 9

111 74-78 RSS**-xx12 (H) 3.3, 5, 12, 15,

24 12

84 76-80 RSS**-xx15 (H) 3.3, 5, 12, 15,

24 15

66 76-82 RSS**-xx24 (H) 3.3, 5, 12, 15,

24 24

42 74-84 RSD**-xx3.3 (H) 3.3, 5, 12, 15,

24 ±3.3 ±152

70 RSD**-xx05 (H) 3.3, 5, 12, 15,

24 ±5 ±100 72-78 RSD**-xx09 (H) 3.3, 5, 12, 15,

24 ±9 ±56 74-78 RSD**-xx12 (H) 3.3, 5, 12, 15,

24 ±12 ±42 76-80 RSD**-xx15 (H) 3.3, 5, 12, 15,

24 ±15 ±33 76-82 RSD**-xx24 (H) 3.3, 5, 12, 15,

24 ±24 ±21 74-84 Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up) Input Voltage Range ±10% Output Voltage Accuracy ±5% max. Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ. RSS12, RSD12 1%/1% of Vin typ. Load Voltage Regulation 3.3V output types 15% typ., 20% max. (10% to 100% full load) 5V output type 12% typ., 15% max. 9V, 12V, 15V, 24V output types 7% typ., 10% max. Output Ripple and Noise (20MHz limited) All Variants 100mVp-p max. Operating Frequency 50kHz min. / 100kHz typ. / 120kHz max. Efficiency at Full Load See Selection Guide Minimum Load = 0% Specifications valid for 10% minimum load only. Isolation Voltage (tested for

1 second) 1000VDC min. H-Suffix (tested for

1 second) 3000VDC min. Rated Working Voltage (long term isolation) see Application Notes Isolation Capacitance RSS, RSS8, RSD, RSD10 15pF min. / 70pF max. RSS12, RSD1 10pF min. / 75pF max. Isolation Resistance

10 GΩ min. cont on next page

1 Watt SMD Single &

Dual Output RoHS 5/6 Conform 1kVDC or3kVDC Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional Continuous Short Circuit Protected Efficiency to 84% RoHS 5/6 Conform Features Unregulated Converters RSS** : ** without marking denotes

5 pins out of

8 fitted (includes /H option) ** with marking

8 denotes

8 pins out of

8 fitted (/H option not available) ** with marking

12 denotes

10 pins out of

12 fitted (includes /H option) RSD** : ** without marking denotes

6 pins out of

10 fitted (includes /H option) ** with marking

10 denotes with

10 pins out of

10 fitted (/H option not available) ** with marking

12 denotes

10 pins out of

12 fitted (includes /H option) EN-60950-1 Certified EN-60601-1 Certified (suffix H) Case and Pinning Options (note restrictions on /H option) xx = Input Voltage (other input and output voltage combinations available on request) * add Suffix H for 3kV Isolation, e.g. RSS-0505/H, RSD-0505/H, RSS12-0505/H, RSD12-0505/H * add Suffix P for Continuous Short Circuit Protection, e.g. RSS8-0505/P, RSS-0505/HP, RSD12-0505/HP * add suffix -R for tape &

reel packing e.g. RSS-0505-R. For more details see Application Notes. RSS_RSD RSS-RSD Description RSS and RSD DC/DC converters are typically used in general purpose low power isolation and voltage matching applications where an SMD mounting style is required. The converters feature a full industrial operating temperature range of -40°C ~ +85°C without derating and come in three different case formats to make them compatible with industry standards. Refer to Application Notes RoHS 2002/95/EC 5/6 END OF LIFE: Please do not use for new design, replace with new SMD converter R1S (single output) and/or R1D (dual output). EOL Dec.2011 END OF LIFE Dec.2011 RSS -RSD www.recom-international.com E-11 REV:0/2009 RSS_RSD Series Specifications - continued ECONOLINE DC/DC-Converter Efficiency %