PDF《自然科学奖公示：》

21: 523). 科学发现2中的代表论文

3、

4、5分别被SCI他引

132、

68、112次,代表论文6被SCI他引429次,为 SCI高被引论文 .本领域著名学者、FSP发明人R.S. Mishra教授 在与通用汽车公司的合作研究中,将该研究工作列为镁合金FSP典型代表,并用于 解释动态再结晶机制: Feng et al. investigated microstructure evolution of AZ80…twinning DRX (TDRX) and CDRX were the main mechanisms in the FSP alloy… (J Mater Sci 2015;

50: 3212);

Feng and Ma [47] indicated that twin induced DRX was the main mechanism... (Mater Sci Eng A 2012;

543: 200).复合材料领域著 名学者香港城市大学S.C. Tjong教授在Mater Sci Eng R (2013, 74: 28)撰写的金属基 复合材料长篇综述大篇幅引用了该项目中关于FSP制备纳米碳复合材料的研究工 作,并选用两幅图为代表评价FSP分散效果. 科学发现3中的代表论文7被SCI他引109次,代表论文8被SCI他引77次,该项目 所提出的热源区-等温溶解层模型被许多学者所证实,其中,该研究工作为葡萄牙科 英布拉大学A. Loureiro教授的研究提供了指导: Yet, Ren et al. [19] and Feng et al. [20] reported that … Therefore, the effect of the FSW parameters on the joint properties is quite different for various aluminum alloys (Mater Design 2016;

93: 146).英国诺丁 汉大学的D.G. McCartney教授撰写的复合材料FSW的综述论文中大篇幅引用代表论 文8的研究结果,并多次给予了正面评价: Feng et al. [32] reported the formation of elliptical shape of the NZ in AA2009/SiC/15p weldment at

600 rpm. They also noticed ... ;

Feng et al. [32] reported that an obvious reduction in grain size of the NZ reached to about

5 μm ... ;

Feng et al. [32] studied the feasibility of joining AA2009/SiC/15p by FSW under annealed condition and followed by PWHT to T4 condition .... between the tool worn material and the BM. ;

Feng et al. [32] showed that the interaction between Fe fromworn tool and AA2009/SiC/15p resulted ........