PDF《Test Report》

Test Report No.

: EG190428976C03MVer.1 Date: May 08,

2019 Page

1 of

15 Applicant : TONGFU MICROELECTRONICS CO.,LTD. Address : No.288,Chongchuan Road, Nantong, Jiangsu, China Sample Name : DIP20 Quantity : 1pc Model : See sample description Lot No. : / Supplier : / Received Date : Apr. 28,

2019 Test Period : Apr. 28,

2019 ~May 08,

2019 Test Summary No. Test Item Test Conclusion

1 Directive 2011/65/EU (RoHS) and commission delegated Directive (EU) 2017/2102 Pass

2 PFOS, PFOA Pass

3 Beryllium oxide, Beryllium copper Pass

4 Antimony(Sb) Pass

5 Please refer to the following page (The requirements of SS-00259 12th edition) Pass Remark: Pass: meet the requirement;

Fail: Doesn'

t meet the requirement;

N/A: Without conclusions or provide test results only. Signed for and on behalf of EMTEK (SUZHOU) CO., LTD Prepared by: Reviewed by: Approved by: Xuyiwen, Candy Jiang Yufeng,Jason Yuan Qi, Mickey Assistant Engineer Technical supervisor Authorized signatory May 08,

2019 Test Report No.: EG190428976C03MVer.1 Date: May 08,

2019 Page

2 of

15 Sample Description Sample No. Sample Number Sample Name Model

01 EG19042897603 DIP20 Metal pin, Black main part 01.1 Metal pin 01.2 Black main part Summary of Test Results 1. RoHS 1.1 Test Method Test Item Test Method Cadmium (Cd), Lead (Pb) IEC 62321-5:2013 Mercury (Hg) IEC 62321-4:2013+AMD1:2017 Hexavalent Chromium (Cr6+ ) IEC 62321-7-1:2015 1.2 Test Instrument Instrument Name Manufacturer Instrument Model ICP-OES Agilent

720 UV-Vis SHIMADZU UV-2600 1.3 Test Result: Limit according to Directive 2011/65/EU (RoHS) and commission delegated Directive (EU) 2017/2102 Test Item Result (mg/kg) MDL (mg/kg) Limit (mg/kg) 01.1 Cadmium (Cd) N.D.

2 100 Lead (Pb) N.D.

2 1000 Mercury (Hg) N.D.

2 1000 Hexavalent Chromium (Cr6+ ) N.D. Metal: 0.10μg/cm2 / Note 1) N.D. = Not Detected (Less than Detection Limit). 2) MDL= Method Detection Limit. 3) Because it is difficult to measure the weight of the anticorrosion in plating accurately, the content of Test Report No.: EG190428976C03MVer.1 Date: May 08,

2019 Page

3 of

15 hexavalent chromium in plating shows in its quality of unit area. Unit: μg/cm2 . Because the storage conditions and production date of the test samples are unknown, the test results of Cr(VI) are only represent its state during test period. a. When Sample Cr(VI) concentration is Less than 0,10 μg/cm2 ,The sample is negative for Cr(VI), The sample not contain Cr(VI) , The test result is Pass. b. When Sample Cr(VI) concentration Between 0,10 μg/cm2 and 0,13 μg/cm2 , The result need to reconfirm. The test result is not judge. c. When Sample Cr(VI) concentration greater than 0,13 μg/cm2 , The sample is positive for Cr(VI), The sample contain Cr(VI) , The test result is Fail. 4) Specimens, which requested to determine Lead, Cadmium and Mercury content, have been dissolved completely. 1.4 Test Flowchart Pb, Cd, Hg Test Process: Add digestion reagent Make up with deionized water water Analyzed by ICP-OES/AAS water Weigh sample Cr6+ Test Process: Sample preparation Boiling water extraction Color development Analyzed by UV-Vis 2. PFOS, PFOA 2.1 Test Method Test Item Test Method PFOS, PFOA US EPA 3550C:2007 2.2 Test Instrument Instrument Name Manufacturer Instrument Model LC-MS SHIMADZU LCMS-2020 2.3 Test Result: Limit according to the REACH Regulation (EC) NO.1907/2006 Test Report No.: EG190428976C03MVer.1 Date: May 08,

2019 Page

4 of

15 Test Item Unit MDL Result Limit 01.1 Perfluorooct ane sulfonic acid and its derivatives (PFOS) mg/kg