PDF《上海如庆电子科技有限公司优惠价现货供应,来电洽谈、订货》

12 Membranes,

1 ring, C-2 couplant Protective Wear Cap Option ? The nylon wear cap provides an economical solution in applications requiring scanning or scrubbing of rough surfaces Nominal Element Size Protective inches mm 1.50

38 NWC-1 1.125

29 NWC-2 1.00

25 NWC-3 0.75

19 NWC-4 0.50

13 NWC-5 High Temperature Delay Line Options ? Allows for intermittent contact with hot surfaces* ? Improves near surface resolution ? Contouring of delay lines provides better coupling on curved surfaces ? Warm temperature delay lines (WTD) can be used for room temperature applications Nominal Element Size Delay Line Retaining Ring 350°F max. (175°C) 500°F max. (260°C) 900°F max. (480°C) inches mm 1.00

25 DRN-3 WTD-3-x HTD-3-x VHTD-3-x 0.75

19 DRN-4 WTD-4-x HTD-4-x VHTD-4-x 0.50

13 DRN-5 WTD-5-x HTD-5-x VHTD-5-x *Recommended usage cycle is ten seconds maximum contact followed by one minute of air cooling. However, the transducer itself should not be heated above 122°F (50°C). X = standard delay line lengths, available in 1/2" (13 mm), 1" (25 mm), 1-1/2" (38 mm). Specify at time of ordering. Note: For the delay lines above, a room temperature material longitudinal wave velocity of 0.100 in/?sec ±0.005 in/?sec may be used as an approximation for basic calculations. This value should not be used for engineering design calculations. Contact us for details. Advantages: ? Provides versatility by offering removable delay line, protective wear cap, and protective membrane ? When the transducer is used alone (without any of the options), the epoxy wear face provides good acoustic impedance matching into plastics, many composites, and other low impedance materials ? Cases are threaded for easy attachment to the delay line, protective membrane, and wear cap options Applications: ? Straight beam flaw detection ? Thickness gaging ? High temperature inspections ? Inspection of plates, billets, bars, and forgings Standard Protected Face ? Comfort Fit sleeves are designed to be easily held and provide steady grip while wearing gloves ? Standard connector style Right Angle BNC (RB), may be available in Straight BNC (SB) ? Delay line, protective membrane, and wear cap options sold separately from the transducer Transducer Dimensions (in inches) Transducer Configurator Frequency (MHz) Nominal Element Size ACCUSCAN-S CENTRASCAN VIDEOSCAN in. mm Part / Item No. Part / Item No. Part / Item No. 0.5

1 25 A601S-RB U8440001 V601-RB U8442001 0.5 1.125

29 A691S-RB U8440031 V691-RB U8442031 0.5 1.5

39 A689S-RB U8440029 V689-RB U8442029

1 0.5

13 A603S-RB U8440005 C603-RB U8441002 V603-RB U8442005

1 0.75

19 A614S-RB U8440021 V614-RB U8442021

1 1

25 A602S-RB U8440003 C602-RB U8441001 V602-RB U8442003

1 1.125

29 V694-RB U8442035

1 1.5

39 A692S-RB V692-RB Nominal Element Size (A) (B) (C) 1.50 1.531.752.25 1.125 1.531.381.81 1.00 1.531.251.63 0.75 1.530.991.41 0.50 1.530.631.19 Frequency (MHz) Nominal Element Size ACCUSCAN-S CENTRASCAN VIDEOSCAN in. mm Part / Item No. Part / Item No. Part / Item No. U8440033 U8442033 2.25 0.5

13 A606S-RB U8440011 C606-RB U8441004 V606-RB U8442011 2.25 0.75

19 A605S-RB U8440009 V605-RB U8442009 2.25

1 25 A604S-RB U8440007 C604-RB U8441003 V604-RB U8442007 2.25 1.125

29 A697S-RB U8440038 V697-RB U8442039 2.25 1.5

39 A695S-RB U8440037 V695-RB U8442037 3.5 0.5

13 A682S-RB U8440027 V682-RB U8442027 3.5 0.75

19 A681S-RB U8440025 V681-RB U8442025 3.5

1 25 A680S-RB U8440023 V680-RB U8442023

5 0.5

13 A609S-RB U8440017 C609-RB U8441006 V609-RB U8442017

5 0.75