PDF《STEMlab 125-14》

STEMLab 125-14 (orignallly Red Pitaya v1.

1) vs. STEMLab 125-10 STEMLab is available in two versions and both offer the same functions and features. With the difference in technical specification of high-frequency inputs and outputs, RAM capacity some other differences (you can find more info in the comparison table bellow). They are addressed to target different groups and / or needs. Where STEMLab

14 has 14bit input / output channels for highly accurate measurement results in professional environment, STEMLab

10 has 10bit input / output channels and is perfect for universities,students and makers. STEMlab 125-14 STEMlab 125-10 STEMLAB 125-10 STEMLAB 125-14 Processor DUAL CORE ARM CORTEX A9 DUAL CORE ARM CORTEX A9 FPGA Xilinx Zynq

7010 SOC Xilinx Zynq

7010 SOC RAM 256MB (2Gb) 512MB (4Gb) System memory Micro SD up to 32GB Micro SD up to 32GB Console connection USB to serial converter required micro USB Power connector Micro USB Micro USB Power consumption 5V, 1,5A max 5V, 2A max Ethernet 1Gbit 1Gbit USB USB 2.0 USB 2.0 WIFI requires WIFI dongle requires WIFI dongle Synchronisation - Daisy chain connector (up to

500 Mbps) RF input channels

2 2 Sample rate

125 MS/s

125 MS/s ADC resolution

10 bit

14 bit Input impedance 1MOhm/10pF 1MOhm/10pF Basic Connectivity RF inputs Full scale voltage range +-20 V +-20V Absolute max. Input voltage range 30V 30V Input ESD protection Yes Yes Overload protection Protection diodes Protection diodes RF output channels

2 2 Sample rate

125 MS/s

125 MS/s DAC resolution

10 bit

14 bit Load impedance

50 Ohm

50 Ohm Voltage range +-1V +-1V Ouput slew rate 200V/us 200V/us Short circut protection YES YES Connector type SMA SMA Digital IOs

16 16 Analog inputs

4 4 Analog inputs voltage range 0-3,5V 0-3,5V Sample rate 100kS/s 100kS/s Resolution 12bit 12bit Analog outputs

4 4 RF inputs RF outputs Extension connector Analog outputs voltage range 0-1,8V 0-1,8V Sample rate 100kS/s 100kS/s Resolution 12bit 12bit Communication interfaces I2C, SPI, UART I2C, SPI, UART Available voltages +5V,+3,3V,-4V +5V,+3,3V,-4V STEMlab 125-10 is available in different kits: Extension connector STEM 125-10 Diagnostic Kit STEM 125-10 Starter Kit STEMlab 125-10 Starter Kit includes: Quantity STEMlab 125-10 board

1 2A, 5V, Interchangeable power Supply

1 4GB, class

10 SD card

1 1m ETH cable

1 STEMlab 125-10 Diagnostic Kit includes: Quantity STEMlab 125-10 board

1 2A, 5V, Interchangeable power Supply

1 4GB, class

10 SD card

1 1m ETH cable

1 Logic Analyzer Basic License Key

1 Logic Analyzer probes

1 Oscilloscope probes

2 SMA to BNC adapters

2 T part

2 50Ohm termination

2 WI-FI USB module

1 Acrylic case for STEMlab board

1 STEMlab 125-14 is available in different kits: STEMlab 125-10 EDU Kit includes: Quantity STEMlab 125-10 board

1 2A, 5V, Interchangeable power Supply

1 4GB, class

10 SD card

1 1m ETH cable

1 Logic Analyzer Basic License Key

1 Logic Analyzer probes

1 Oscilloscope probes

2 SMA to BNC adapters

2 T part

2 50Ohm termination

2 WI-FI USB module

1 Acrylic case for STEMlab board

1 Sensor Extension Module

1 STEM 125-10 EDU Kit STEM 125-14 Diagnostic Kit STEM 125-14 Starter Kit STEMlab 125-14 Starter Kit includes: Quantity STEMlab 125-14 board

1 2A, 5V, Interchangeable power Supply

1 4GB, class

10 SD card

1 1m ETH cable

1 STEMlab 125-14 Diagnostic Kit includes: Quantity STEMlab 125-14 board

1 2A, 5V, Interchangeable power Supply

1 4GB, class

10 SD card

1 1m ETH cable