PDF《东莞市九木精密电子有限公司》

A/1 NEW TITLE: MX5.

08mm Pitch Connector Series Sheet:

1 of

6 REV. DESCRIPTION WRITTEN BY: Liu jun CHECKED BY: K B. Sun APPROVED BY: Succeed. Sun DATE: YR/MO/DAY 2017/06/26 东莞市九木精密电子有限公司 CHINESE ENGLIH Dongguan?Joint?more?precision?electronics?Co.,Ltd.? LANGUAGE 【1.适用围 SCOPE】 此种规格包括 MX5.08mm Pitch ?接器系? This Specification Covers the MX5.08mm Pitch Connector Series. 【2.规格与料号 Spec and Part number】 规格内容 / Specification 产品?号/ Production No. 端子/Terminal C5080F/M-XXX 胶壳/Housing C5080HF/M-NP 针座/Wafer(90 度/Right Angle/180 度/Straight) C5080WV/WR-NP 【3.材质与表面处理 Disposal of Material and surface】 规格内容 / Specification 材质/Materials 表面处理 / Disposal of Surface 端子/Terminal 黄铜/ Brass 磷铜/Phosphor Bronze Tin-Plated: 30μ Nickel: 15μ 胶壳/Housing 尼龙

66 / Nylon

66 UL 94V-2 针座/Wafer Base 尼龙

66 / Nylon 66+GF15% UL 94V-2 PIN 黄铜/Brass Tin

70 u〃Plated Over

30 u〃Nickel (上述参数请以工程图为准/Please Refer to the Project drawing for the above Specification) 【4. 额定等级 Ratings and applicable wires】 *升温时含端子.Including terminal temperature rise. 【5.性能 PERFORMANCE】 项目【Item】 规格【Standard】 额定电压 Rated Voltage (Max.) 250V [AC/DC] 额定电? Rated Current (Max.) 5A 使用温?围 Ambient temperature Range -40℃~+105℃ 适用线径 Applicable wire insulation O.D AWG 16#、 18#、 20#、 22# Insulation O.D. 2.8mm(Max.) A/1 NEW TITLE: MX5.08mm Pitch Connector Series Sheet:

2 of

6 REV. DESCRIPTION WRITTEN BY: Liu jun CHECKED BY: K B. Sun APPROVED BY: Succeed. Sun DATE: YR/MO/DAY 2017/06/26 东莞市九木精密电子有限公司 CHINESE ENGLIH Dongguan?Joint?more?precision?electronics?Co.,Ltd.? LANGUAGE 5-1. 电气的性能 Electrical Performance. 项目【Item】 条件【Test Condition】 规格【Requirement】 5-1-1 接触阻抗 Contact Resistance 公母配合,开放电压 20mV 以下,电? 10mA 检测? 接器.Mate connectors, measure by dry circuit, 20mV MAX, 10mA.(Based upon EIA-364-06A).

20 milliohms Max. 5-1-2 绝缘阻抗 Insulation Resistance 公母配合,在相邻端子,端子与地片之间,使用 500V 的直?电,检测?接器.Mate connectors, apply 500V DC between adjacent terminal or ground.(Based upon EIA-364-21B / MIL-STD-202 Method

302 Cond.B)

1000 Megohms Min. 5-1-3 耐电压 Dielectric Strength 公母配合,在相邻端子,端子与地片之间,使用 250V 的交?电

1 分锺,检测?接器. Mate connectors, apply 250V AC for

1 minute between adjacent terminal or ground. (Based upon EIA-364-20A / MIL-STD-202 Method 301) ?出现中断等情况 No Breakdown and Flashover 5-1-4 铆线后端子接 触阻抗 Contact resistance on crimped portion 铆线后之端子,开放电压 20mV 以下,电? 10mA 检 测?接器.Crimp the applicable wire on to the terminal measure by dry circuit 20mV MAX, 10mA.

10 milliohms Max. A/1 NEW TITLE: MX5.08mm Pitch Connector Series Sheet:

3 of

6 REV. DESCRIPTION WRITTEN BY: Liu jun CHECKED BY: K B. Sun APPROVED BY: Succeed. Sun DATE: YR/MO/DAY 2017/06/26 东莞市九木精密电子有限公司 CHINESE ENGLIH Dongguan?Joint?more?precision?electronics?Co.,Ltd.? LANGUAGE 5-2. 机械的性能 Mechanical Performance. 5-3. 环境性能及其它 Environmental Performance and Others. 项目【Item】 条件【Test Condition】 规格【Requirement】 5-2-1 插拔? Insertion and Withdrawal Force 以每分锺 25±3mm 的速?插入和拔出. Insert and withdraw connectors at the speed rate of 25±3mm/minute. ?照第