PDF《HD015》

57 HD015 Features 特点 High voltage DC load control.

高电压DC负载控制. High performance DC relay for photovoltaic power generation systems, energy storage system and xEV charging device, etc. 高性能DC继电器,适用于太阳能发电系统、储能系统、xEV充电设备等. Complies with RoHS-Directive 2011/65/EU. 符合RoHS 2011/65/EU指令. Type List 型号列表 Terminal style 引出端形状 Contact form 触点形状 Designation (provided with) 分类名称 Flux tight 防助焊剂型 PCB terminal PCB 用引出端 1A (SPDM) HD015P-1AH-F-C Ordering Information 型号命名 HD015 P - 1A H - F - C

1 2

3 4

5 6

7 Contact Rating 触点额定负载 1. HD015 -- Basic series designation 基本型号 2. P -- PCB terminal PCB用引出端 3. 1A -- Form A, single-pole, double-make (SPDM) 常开触点,一组动合(SPDM) 4. H -- Contact material Ag alloy 银合金触点 5. F -- Class F F级绝缘 6. C -- Flux tight 防助焊剂型 7. -- Coil voltage (please refer to the coil rating data for the availability) 线圈电压(请参考线圈参数) Rated load (Resistive) 阻性负载 40A 400VDC, On 1s / Off 19s,

5000 ops. Breaking voltage 断开电压 Max. 400VDC Continuous carrying current 连续通电电流 Max. 40A ? Each

1 form A contact 单一常开触点 ? Each

1 form A contact connected in series 串联常开触点 Rated load (Resistive) 阻性负载 20A 1000VDC, On 1s / Off 19s,

5 ops. 35A 900VDC, On 1s / Off 19s,

50 ops. 50A 620VDC, On 1s / Off 19s,

1000 ops. -25A 400VDC, On 1s / Off 19s,

100 ops. Breaking voltage 断开电压 Max. 1000VDC Continuous carrying current 连续通电电流 Max. 40A

58 HD015 Specification 技术参数 Coil Rating 线圈参数 (DC) Power supply Load Current Current (+) (-) (+) (-) Power supply ? Figure

1 图1 Notes : (1) Reference circuit for above series connection, please refer to figure 1. 上述串联请参见图1参考回路图. (2) With above

2 cm mounting distance between two relays. 两个继电器安装距离间隔2公分以上. (3) Coil terminal with polarity sensitivity, please follow the layout instruction. 线轮端子带极性,请参见接线图. Rated voltage 额定 电压 (V) Rated current 额定电流 ±10 % at 23°C (mA) Coil resistance 线圈电阻 ±10 % at 23°C (?) Pick up voltage (Max.) 吸合电压 (最大值) at 23°C (1) Drop out voltage (Min.) 释放电压 (最小值) at 23°C Continuous voltage 持续电压 at 85°C (2) Power consumption at rated / holding voltage 额定/保持电压 功耗

12 150

80 80 % of rated voltage 额定电压 的80%

5 % of rated voltage 额定电压 的5% 45~55 % of rated voltage 额定电压的 45~55% approx. 约1.8W / 0.36W (2)

24 75

320 Notes : (1) To energize relay properly apply 100%~120% nominal coil voltage for 200ms. 继电器施加全额线圈电压的100%~120%维持200毫秒. (2) Coil holding voltage is 45~55% of nominal voltage after applying nominal voltage for 200ms. 线圈保持电压是全额线圈电压维持200毫秒后,降至全额线圈电压的45~55%. Contact material 触点材料 Ag alloy 银合金 Contact gap 触点间距 ≥3.0 mm Voltage drop (1) 接触压降 (1) Typ. 40mV at 10A Operate time (1) 吸合时间 (1) 30ms Max. Release time (1) 释放时间 (1) 15ms Max. Insulation resistance (1) 绝缘电阻 (1) 100M? Min. (DC 500V) Dielectric strength (1) 介质耐压 (1) Between open contact 开路触点间 : AC 2000V, 50/60Hz

1 min. Between contact and coil 触点线圈间 : AC 2500V, 50/60Hz

1 min. Vibration resistance 振动 Operating extremes 稳定工作 10~500Hz, 5.0G Damage limits 损坏极限 10~500Hz, 5.0G Shock resistance 冲击 Operating extremes 稳定工作 10G Damage limits 损坏极限 100G