PDF《System Development Platform》

a System Development Platform User Guide Revision 1.

2, November

2010 Part Number 82-100110-01 Analog Devices, Inc. One Technology Way Norwood, Mass. 02062-9106 Copyright Information ?

2010 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu- ment may not be reproduced in any form without prior, express written consent from Analog Devices, Inc. Printed in the USA. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use;

nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by impli- cation or otherwise under the patent rights of Analog Devices, Inc. Trademark and Service Mark Notice The Analog Devices icon bar and logo, VisualDSP++, Blackfin, EZ-KIT Lite, and EZ-Extender are registered trademarks of Analog Devices, Inc. EZ-Board is a trademark of Analog Devices, Inc. All other brand and product names are trademarks or service marks of their respective owners. Regulatory Compliance The EVAL-SDP-CB1Z is designed to be used solely in a laboratory envi- ronment. The board is not intended for use as a consumer end product or as a portion of a consumer end product. The board is an open system design which does not include a shielded enclosure and therefore may cause interference to other electrical devices in close proximity. This board should not be used in or near any medical equipment or RF devices. The EVAL-SDP-CB1Z board has been certified to comply with the essen- tial requirements of the European EMC directive 89/36/EC amended by 93/68/EEC and therefore carries the CE mark. The EVAL-SDP-CB1Z board evaluation system contains ESD (elec- trostatic discharge) sensitive devices. Electrostatic charges readily accu- mulate on the human body and equipment and can discharge without detection. Permanent damage may occur on devices subjected to high-energy discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Store unused EVAL-SDP-CB1Z boards in the protective shipping package. SDP User Guide i CONTENTS PREFACE Product Overview iii Purpose of This Manual iv Intended Audience v Manual Contents v What'

s New in This Manual v Technical or Customer Support vi Product Information vi Analog Devices Web Site vi Notation Conventions vii GETTING STARTED Package Contents 1-1 PC Configuration 1-2 USB Installation 1-2 Installing the Software 1-3 Connecting the SDP Board to the PC 1-3 Verifying Driver Installation 1-3 Powering Up/Down the SDP 1-5 Contents ii SDP User Guide Powering Up the SDP Board 1-5 Powering Down the SDP Board 1-5 HARDWARE DESCRIPTION LEDs 2-1 POWER LED (LED2)2-1 LED

1 2-2 Connector Details 2-2 Connector Pin Assignments 2-3 Pin Sharing 2-10 Power 2-11 Daughter Board Design Guidelines 2-11 Connector Location 2-11 Keep Out Area 2-14 Restriction on Right Angle Connectors 2-14 Mechanical Specifications 2-14 SCHEMATIC SDP User Guide iii PREFACE Thank you for purchasing the EVAL-SDP-CB1Z System Development Platform (SDP) from Analog Devices, Inc. The SDP is used as part of the evaluation system for many ADI components. The SDP board is designed to be used in conjunction with various ADI component evaluation boards as part of a customer evaluation environ- ment. The SDP provides USB connectivity through a USB 2.0 high speed connection to the computer allowing users to evaluate components on this platform from a PC application. The SDP is based on ADSP-BF527 Blackfin processor, with the Blackfin processor peripheral communication lines available to the component daughter board through the two identical 120-pin small footprint connectors Product Overview The board features: ? Analog Devices ADSP-BF527 Blackfin processor ? Core performance up to