PDF《用户使用手册》

版权归属于艾德克斯电子(南京)有限公司 Ver3.

0/Jan, 2010/ IT8211 用户使用手册 直流电子负载 型号 IT8211 安全规则 为防止触电,非本公司授权人员,严禁拆开机器. 严禁将本设备使用于生命维持系统或其他任何有安全要求的设备上. 我们对于使用本产品时可能发生的直接或间接财务损失,不承担责任. 认证与品质保证 艾德克斯电子保证本产品性能于工厂交 付时,符合本手册所标称的各项技标. WARNING Safety Regulations Certification Notice To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To avoid injuries, always disconnect power, discharge circuits, and remove external voltage sources before touching components. KEEP AWAY FROM LIVE CIRCUITS. We cannot accept responsibility for any direct or indirect financial damage or loss of profit that might occur when using the power supply. The instrument chassis and cover must be connected to an electrical ground. We certify that this product met its published specifications at time of shipment from the factory. The information contained in this document is subject to change without notice. 通告 本手册的内容如有更改,恕不另行通知.

2 用户使用手册 Warranty Limitation of Warranty This hardware product is warranted against defects in material and workmanship for a period of ONE year from date of delivery. IT6720 power supply for use with a hardware product and when properly installed on that hardware product, are warranted not to fail to execute their programming instructions due to defects in material and workmanship for a period of

90 days from date of delivery. During the warranty period our company will either repair or replace products which prove to be defective. Our company does not warranty that the operation for the software firmware or hardware shall be uninterrupted or error free. For warranty service, with the exception of warranty options, this product must be returned to a service facility designated by our company. Customer shall prepay shipping charges by (and shall pay all duty and taxes) for products returned to our place for warranty service. Our company shall pay for return of products to Customer. The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by the customer, customer-supplied software or interfacing, unauthorized modification or misuse, operation outside of the environmental specifications for the product, or improper site preparation and maintenance. 保固服务 本公司对本产品的材料及制造,自出货之日起,给予一年的质量保固. 本产品若需保固服务或修理,必须将产品送回本公司指定的维修单位.送回本公司作保固服 务的产品,顾客须预付寄送到本公司维修部的单程运费,本公司将负责支付回程运费.产品 若从其它国家回厂维修,则所有运费、关税及其它税赋均须由顾客负担. 保固限制 上述的保证不适用因以下情况所造成的损坏: 顾客不正确或不适当的维修产品;

顾客使用自己的软件或界面;

未经授权的修改或误用;

在指定的环境外操作本产品,或是在不当的地点配置及维修;

顾客自行安装的电路造成的损坏,或顾客使用自己的产品造成的瑕疵;

产品型号或机身序列号被改动、删除、移除或无法辨认;

损坏源于事故,包括但不限于雷击、进水、火灾、滥用或疏忽.

3 用户使用手册 Compliance Statements Disposal of Old Electrical &