PDF《30-A, 5-V INPUT, NON-ISOLATED,》

125 ?A Iin Input standby current Inhibit (pin 1) to GND, Track (pin 14) open

3 mA f s Switching frequency Over VI and IO ranges

640 kHz CI External input capacitance

1000 (4) ?F (1) The set-point voltage tolerance is affected by the tolerance and stability of RSET. The stated limit is unconditionally met if RSET has a tolerance of 1% with

100 ppm/C or better temperature stability. (2) A low-leakage (1690 mA

16 *

15 1 ≥ 2(3) N/R(4) EEUFC1E102S FC (Radial)

25 V

1800 0.029?

2205 mA

16 *

20 1 ≥ 1(3) N/R(4) EEUFC1E182 FC(SMD)

25 V

2200 0.028? >

2490 mA

18 * 21,5

1 ≥ 1(3) N/R(4) EEVFC1E222N FK(SMD)

25 V

1000 0.060?

1100 mA 12,5*13,5

1 ≥ 2(5) N/R(4) EEVFK1V102Q United Chemi-Con PTB(SMD) Polymer 6.3 V

470 0.025?

2600 mA 7,3x 4,3x 2(6) ≥

2 ~ ≤ 4(3) C ≥ 2(2) 6PTB477MD8TER Tantalum 2.8 LXZ, Aluminum (Radial)

25 V

680 0.068?

1050 mA

10 *

16 2 ≥

1 ~ ≤ 3(3) N/R(4) LXZ25VB681M10X20LL PS,

16 V

330 0.014?

5060 mA

10 * 12,5 3(6) ≥

2 ~ ≤

3 B ≥ 2(2) 16PS330MJ12 Poly-Aluminum(Radial) PXA, Poly-Aluminum

16 V

330 0.014?

5050 mA

10 * 12,2 3(6) ≥

2 ~ ≤

3 B ≥ 2(2) PXA16VC331MJ12TP (SMD) PS, 6.3 V

680 0.010?

5500 mA

10 * 12,5

2 ≥

1 ~≤

2 C ≥ 1(2) 6PS680MJ12 Poly-Aluminum(Radial) PXA, 6.3 V

470 0.012?

4770 mA

8 * 12,2 2(6) ≥

1 ~ ≤

2 C ≥ 1(2) PXA6.3VC471MH12TP Poly-Aluminum(Radial) Nichicon, Aluminum

25 V

470 0.070?

985 mA 12,5 *

15 2(6) ≥ 2(3) N/R(4) UPM1E471MHH6 HD (Radial)

25 V

470 0.038?

1430 mA

10 *

16 2(6) ≥ 2(3) N/R(4) UHD1E471MHR PM (Radial)

35 V

560 0.048?

1360 mA

16 *

15 2 ≥ 2(3) N/R(4) UPM1V561MHH6 Panasonic, 7,3 L*4,3 Poly-Aluminum: 2.0 V

390 0.005?

4000 mA W *4,2H N/R(7) N/R(7) B ≥ 2(2) EEFSE0J391R(VO≤1.6V)(8) (1) Capacitor Supplier Verification Please verify availability of capacitors identified in this table. Capacitor suppliers may recommend alternative part numbers because of limited availability or obsolete products. In some instances, the capacitor product life cycle may be in decline and have short-term consideration for obsolescence. RoHS, Lead-free and Material Details See the capacitor suppliers regarding material composition, RoHS status, lead-free status, and manufacturing process requirements. Component designators or part number deviations can occur when material composition or soldering requirements are updated. (2) Required capacitors with TurboTrans. See the TransTrans Application information for Capacitor Selection Capacitor Type Groups by ESR (Equivalent Series Resistance) : a. Type A = (100 <

capacitance * ESR ≤ 1000) b. Type B = (1,000 <

capacitance * ESR ≤ 5,000) c. Type C = (5,001 <

capacitance * ESR ≤ 10,000) (3) Total bulk nonceramic capacitors on the output bus with ESR of ≥ 15m? to ≤ 30m? requires an additional ≥

200 ?F of ceramic capacitor. (4) Aluminum Electrolytic capacitor not recommended for the TurboTrans due to higher ESR * capacitance products. Aluminum and higher ESR capacitors can be used in conjunction with lower ESR capacitance. (5) Output bulk capacitor'

s maximum ESR is ≥

30 m?. Additional ceramic capacitance of ≥

200 ?F is required. (6) The minimum capactiance on the input bus can be less than

1000 ?F when using this type of capacitor. Insure that the minimum rms ripple current rating is met. (7) N/R C Not recommended. The voltage rating does not meet the minimum operating limits. (8) The voltage rating of this capacitor only allows it to be used for output voltage that is equal to or less than 80% of the working voltage.