编辑: 旋风 2019-07-03
ID 705E_UK Rev.

02 Date 12/08/16 Polibrid 705E Page

1 of

22 International Paint Ltd Protective Coatings Technical Support Polibrid 705E Application Guidelines Prepared by: PC Technical Support International Paint Ltd. www.international-pc.com The information in this guideline is not intended to be exhaustive;

any person using the product for any purpose other than that specifically recommended in this guideline without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at their own risk. All advice given or statements made about the product (whether in this guideline or otherwise) is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. THEREFORE, UNLESS WE SPECIFICALLY AGREE IN WRITING TO DO SO, WE DO NOT ACCEPT ANY LIABILITY AT ALL FOR THE PERFORMANCE OF THE PRODUCT OR FOR (SUBJECT TO THE MAXIMUM EXTENT PERMITTED BY LAW) ANY LOSS OR DAMAGE ARISING OUT OF THE USE OF THE PRODUCT. WE HEREBY DISCLAIM ANY WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. All products supplied and technical advice given are subject to our Conditions of Sale. You should request a copy of this document and review it carefully. The information contained in this guideline is liable to modification from time to time in the light of experience and our policy of continuous development. It is the user'

s responsibility to check with their local International Paint representative that this guideline is current prior to using the product. ID 705E_UK Rev.

02 Date 12/08/16 Polibrid 705E Page

2 of

22 The International Paint Application Guidelines have been produced and revised in line with the Worldwide Protective Coatings Product Range. The purpose of the guidelines is to ensure that the product, as applied, provides the required level of durability. Successful in-service performance of a coating system depends upon both the correct choice of product(s) and the adoption of the correct guidelines for surface preparation and paint application. The responsibilities for achieving the specific standards outlined, and for carrying out surface preparation and paint application, rest with the Contracting Company. Under no circumstances do these responsibilities rest with International Paint. We will generally provide for the presence of a Technical Service Representative at key stages during the performance of the contract. The role of the International Paint Technical Service Representative is advisory only unless otherwise specified in the terms and conditions of the contract. The information contained herein presents guidelines for the application of Polibrid 705E to correctly prepared surfaces. Table of Contents 1. POLIBRID 705E SPECIFICATION 1.1. Surface Preparation 1.2. Typical Specification 1.3. Notes 2. ENVIRONMENTAL CONDITIONS FOR APPLICATION 3. POLIBRID 705E APPLICATION PROCEDURE 3.1. Steel 3.2. Concrete 3.3. Treatment of Expansion Joints 3.4. Geotextile Method 3.5. Recoating 3.6. Return to Service 4. POLIBRID 705E APPLICATION NOTES 5. TECHNICAL INSPECTION 6. GENERAL NOTES 6.1. Steel Condition 6.2. Steelwork Preparation 6.3. Heating 6.4. Lighting 6.5. Storage of Product at Point of Application 6.6. Weather Shelters 6.7. Abrasive Grit Blasting 6.8. Cleaning 6.9. Mixing 6.10. Stripe Coating 7. REPAIR PROCEDURE WITH POLIBRID 705E REPAIR KIT 8. HEALTH &

下载(注:源文件不在本站服务器,都将跳转到源网站下载)
备用下载
发帖评论
相关话题
发布一个新话题