编辑: 没心没肺DR 2019-07-05
2017 年11 月30 日 非常感谢一直以来对我公司产品的支持.

弊社将在相机外箱里一同包装(安全注意事项)的文件. 特此通知,敬请给予谅解. 【 适用相机 】 装载 CMOS 芯片的相机 具体请参考添付资料. 【 变更内容 】 相机外箱里一同包装(安全注意事项)的文件. 具体请参考添付资料. 【 适用时期 】

2017 年12 月以后 诺有不明之处,请与各营业负责人员进行确认. OMRON SENTECH CO.,LTD. 营业部 尊敬的客户 243-0432 Ebina Prime Tower 9F, 2-9-50 Chuo, Ebina, Kanagawa, Japan Tel 046-236-6660 Fax 046-236-6661 关于相机外箱里追加文件(安全注意事项) 外箱里一同包装(安全注意事项)的文件 相关型号列表 Series Model No. Series Model No. STC-SBS43POE STC-MBS43U3V STC-SCS43POE STC-MCS43U3V STC-SBS163POE STC-MBE132U3V STC-SCS163POE STC-MCE132U3V STC-SBE132POE STC-MBS163U3V STC-SCE132POE STC-MCS163U3V STC-CMB2MPOE STC-MBCM200U3V STC-CMC2MPOE STC-MCCM200U3V STC-CMB2MPOE-IR STC-MBCM200U3V-NIR STC-SBS231POE STC-MBS231U3V STC-SCS231POE STC-MCS231U3V STC-SBS312POE STC-MBS241U3V STC-SCS312POE STC-MCS241U3V STC-CMB4MPOE STC-MBS312U3V STC-CMC4MPOE STC-MCS312U3V STC-CMB4MPOE-IR STC-MBS322U3V STC-SBA503POE STC-MCS322U3V STC-SCA503POE STC-MBCM401U3V STC-SBS500POE STC-MCCM401U3V STC-SCS500POE STC-MBCM401U3V-NIR STC-SCS853POE STC-MBA5MUSB3 STC-SBA1002POE STC-MCA5MUSB3 STC-SBS1242POE STC-MBS500U3V STC-SCS1242POE STC-MCS500U3V STC-CMB33PCL STC-MBS510U3V STC-CMC33PCL STC-MCS510U3V STC-SPB43PCL STC-MBS881U3V STC-SPC43PCL STC-MCS881U3V STC-SPB163PCL STC-MBS891U3V STC-SPC163PCL STC-MCS891U3V STC-CMB200PCL STC-MBS122BU3V STC-CMC200PCL STC-MCS122BU3V STC-CMB200PCL-NIR STC-MBS123BU3V STC-SPB312PCL STC-MCS123BU3V STC-SPC312PCL STC-S133UVC-BL STC-SPB322PCL STC-S133UVC-BLL STC-SPC322PCL STC-S133UVC-BLCS STC-CMB401PCL STC-CMB120AOPT-F STC-CMC401PCL STC-CMC120AOPT-F STC-CMB401PCL-NIR STC-CMB401CXP STC-APB503PCL STC-CMC401CXP STC-APC503PCL STC-CMB120ACXP STC-SPB500PCL STC-CMC120ACXP STC-SPC500PCL STC-CMB120ACXP-T STC-SPB510PCL STC-CMC120ACXP-T STC-SPC510PCL STC-CMB120ACXP-F STC-SPB881PCL STC-CMC120ACXP-F STC-SPC881PCL STC-CMB120ACXP-T-F STC-SPB891PCL STC-CMC120ACXP-T-F STC-SPC891PCL STC-HD203DV STC-CMB120APCL STC-HD203DV-CS STC-CMC120APCL STC-HD203SDI STC-CMB120APCL-F STC-HD203SDI-CS STC-CMC120APCL-F STC-S133N STC-SPB122BPCL STC-S133P STC-SPC122BPCL STC-S133N-L STC-SPB123BPCL STC-S133P-L STC-SPC123BPCL STC-S133N-CS STC-S133P-CS GigE CameraLink USB3 CoaXPress Opt-C:Link NTSC DVI/SDI This shows, assumption for possibility of serious accident leading death or serious injury if ignore this note and camera uses incorrectly. Please read carefully this "Precautions for safe use" before use the camera. Then the camera uses correctly with agreeing with below notes. In this "Precautions for safe use", notes divides into "Warning" and "Caution" to use the camera safety and prevent to harm and damage. Precautions for safe use Precautions for safe use Warning Warning Do not use with out of power voltage range that is specified in the specifications for this camera. This will cause of fire, electrification or malfunction. Caution Do not grounding DC power (+) of all devices that are connect to the camera. The camera housing is connecting to

0 V line of camera inside circuit. There is a risk of short circuit between camera inside circuit and frame ground. This will cause of malfunction. Do not wrong wiring. This will cause of fire or malfunction. It is necessary to wiring and mounting that is specified in the specifications for this camera. This will cause of fire or malfunction. It is necessary to wiring with turn off the camera. This will cause of electrification or malfunction. It is necessary to mounting the camera without stress for the cable. This will case of electrification or fire. Warning Do not touch the terminal and PCB board while turn on the camera. This will cause of electrification or accident caused by malfunction. Caution Do not put combustibles near the camera. This will cause of fire. Do not block the radiation holes. This will cause of fire due to increase the camera inside temperature. Do not use without usage that is specified in the specifications for this camera. This will cause of personal injury or malfunction. Do not push metals including screw driver into radiation holes. This will cause of electrification or malfunction. Do not push contamination into opening of the camera. This will cause of electrification or malfunction. Caution It is turn off the camera when maintaining or inspecting the camera. This will cause of electrification. Do not disassemble or repair the camera. This will cause of fire, electrification or malfunction. Caution It is necessary to dispose as industrial waste. Warning Do not use flammable or explosiveness atmospheres. This will cause of personal injury or fire. Caution Use and store under specified environmental conditions (Vibration, shock, temperature,humidity) in the specifications for this camera. This will cause of fire or damage the camera. Do not use for "safety for human body" related usage. This camera is designed for use "do not harm human body immediately" if by any chance the camera has malfunction. (1) Do not give shock to the camera. (2) Do not haul or damage the camera cable. (3) Do not wrap the camera with any material while using the camera. This will cause the internal camera temperature to increase. (4) When the camera moving or using the place that temperature difference is exteram, countermeasure for dew condensation (heat removal / cold removal) is necessary. (5) While the camera is not using, keep the lens cap on the camera to prevent dust or contamination from getting in the sensor or filter and scratching or damaging it. Do not keep the camera under the following conditions. In wet, moist, high humidity or dusty place Under direct sunlight In extreme high or low temperature place Near an object that releases a strong magnetic or electric filed Place with strong vibrations (6) Apply the power that satisifies that specified in specifications for the camera. (7) The defective pixels may appear due to the sensor characteristics. (8) Use below recommend materials (or equivalent materials) to clean the surface of glass. Air dust: Non Freon air duster (NAKABAYASHI Co., LTD.) Alcohol: Propan-2-ol (SAN'EI KAKO Co., LTD.) Non-woven: nikowipe clean room (NKB) (9) Use a soft cloth to clean the camera. Product Precautions This shows, assumption for possibility of bear the damage or physical damage if ignore this note and camera uses incorrectly. Caution This symbol shows general prohibition. This symbol shows completion or instruction. Thank you for purchasing the product. To ensure the safe usage of the product, read and understand this document, and the manuals for all other product. Contact your OMRON SENTECH representative and make sure that you use the most recent version of each manual. Keep this document and all relative manuals in a safe place, and make sure that they are delivered to the final user of the product. About Graphic symbols Meaning of Signal Words Environment / condition Installation and cable wiring Usage instruction Disposal Maintenance Suitability for Use OMRON SENTECH CO.,LTD. shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron Sentech will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON SENTECH PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. See also Product catalog for Warranty and Limitation of Liability. Contact: www.sentech.co.jp Tel: (81) 046-236-6660 Fax: (81) 046-236-6661 E-Mail: [email protected] Regional Headquarters 1.The following are Common Caution For Camera Link output cameras, do not use Camera Link un-supported cable and board. There is a risk of malfunction if the camera connects with wrong environment and turn on the camera. For CoaXPress output cameras, do not use CoaXPress un-supported cable and board. There is a risk of malfunction if the camera connects with wrong environment and turn on the camera. For Opt-C: Link output cameras, do not use Opt-C: Link un-supported cable and board. There is a risk of malfunction if the camera connects with wrong environment and turn on the camera. Models which supports Camera Link etc. 2.The following applies to some models Warning For high-temperature attention label attached cameras, do not touch the camera housing while or after using the camera. There is a risk of get burned. Models with high-temperature attention labels attached to the product body.

下载(注:源文件不在本站服务器,都将跳转到源网站下载)
备用下载
发帖评论
相关话题
发布一个新话题