PDF《PT-5201A/B MINI GRINDER》

PT-5201A/B MINI GRINDER USER'

S MANUAL Component 1.

Collet nut 2. Spindle lock button 3. Switch 4. Cord Important! Please carefully read the instruction in this manual as well as the general. Safety instruction before using this appliance, keep these manuals handy. THE VARIOUS PLASTIC BAGS SHOULD NOT BE LEFT WITHIN THE REACH OF CHILDREN, RISK OF SUFFOCATION. Technical characteristics Voltage 18VDC Max. diameter 3.2mm No load speed 8000~18000rpm ± 10% Vibration level Less than 0.15mm Acoustic pressure less than 70dB Adaptor Input 230V~50Hz or 120V 60Hz Output 18VDC 400mA Use To use the different accessories, press the shaft locking button located to the rear of chuck, unscrew it by hand, fit the chosen accessories and hand tighten the chuck again. Accessories (1)

2 pcs grinding (3mm) stones (2)

1 pc collet (?2.4mm) (3)

2 pcs diamond bits (5mm) ④2 pcs sanding bands 6.5x13mm (5)

1 pc nylon bruch (5mm) (6)

1 pc engraving bit SAFETY INSTRUCTIONS IMPORTANT! WHEN USING ELECTRICAL TOOLS, THE FOLLOWING SAFETY INSTRUCTIONS SHOULD BE OBSERVED TO PREVENT THE RISK OF ELECTRIC SHOCK, PERSONAL INJURY AND FIRE. READ AND OBSERVE THESE INSTRUCTIONS CAREFULLY BEFORE USING THE TOOL. 1. Keep work area clean Cluttered and benches invite injuries. 2. Consider work area environment Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use power tools near flammable liquids or gases. 3. Guard against electric shock Prevent body contact with grounded surfaces(e.g. pipes, radiators, ranges, refrigerators, etc.). 4. Keep children away Do not let visitors contact tool or extension cord. All visitors should be kept away from work area. 5. Store ideal tools When not in use, tools should be stores in a dry, high, or locked-up place, out of the reach of children. 6. Do not force tool It will do a better job and operate more safely at the rate for which it was intended. 7. Use right tool Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for other than their intended purpose;

for example, do not use a circular saw for cutting tree limbs or logs. 8. Dress properly Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-skid footwear is recommended when working outdoor. Wear protective hair covering to contain hair. 9. Use safety glasses Also use a dust mask during pulverulent operations and wear ear protection. If the noise level. Exceeds 70dB(A), ear protection is obligatory. Indicated noise levels may be exceeded dependent on the working environment and the material to be treated. 10. Use dust extraction If dust extraction and collection devices are present on the tool, make sure that they will be used properly. 11. Do not abuse cord Never carry tool by cord or yank it to disconnect it from wall outlet. Keep cord from heat, oil and sharp edges. 12. Secure work Use clamps or a vise to hold the workpiece. It is safer and it frees both hands to operate tool. 13. Do not overreach Keep proper footing and balance at all times. 14. Maintain tools with care Keep tools sharp and clean for better and safe performance. Follow instructions for lubricating and changing accessories. Inspect tool periodically and, if damaged, have them repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep Handles dry, clean and free from oil and grease. 15. Disconnect tools Disconnect tools when not in use, before servicing, and when changing accessories such as blades, bits and cutters. 16. Remove adjusting keys and wrenches From the habit of checking to see that keys and adjusting wrenches are removed from tool before switching it on. 17. Avoid unintentional starting Do not carry plugged-in tools with finger on switch. Be sure the tool is switched off before plugging in. 18. Outdoor use extension cords When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 19. Stay alert Watch what you are doing. Use common sense. Do not operate tool when you are tired. 20. Check damaged parts Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or re placed by an authorized service center unless otherwise indicated elsewhere in the instruction manual. Do not use tool if switch does not turn it on and off. 21. Warning The use of any other accessories or attachment other than recommended in the instruction manual may present a risk of personal injury. 22. Have your tool repaired by an expert This electric appliance is built accordance with the relevant safety rules. Repair of electric appliances must only be carried out by experts otherwise it may cause considerable danger for the user. 23. Store these instructions for future reference. Assembly and operation Mounting an accessory Keep the spindle lock button depressed. Slacken the collect nut. Insert the shaft of the accessory into the coll........