PDF《PI49FCT3807》

1 PS7010F 11/16/09 3.

3V Fast CMOS Clock Driver Description Pericom Semiconductor'

s PI49FCT3807 is a 3.3V 1-to-10 clock driver.Thislowskewclockdriverfeaturesoneinputandtenoutputs fanout. The large fanout from a single input line reduced loading on input clock. TTL level outputs reduce noise levels on the part. Typical applications are clock and signal distributon Pin Con?guration Pin Description Pin Name Description A Input B0-B9 Outputs GND Ground VCC Power Block Diagram PI49FCT3807 Features ? 3.3V version of PI49FCT807 ? Ultra low skew: 0.35ns ? Low Input Capacitance ? Minimum duty cycle distortion ? 1:10 fanout ? High speed: 3.5ns propogation ? TTL input and CMOS output compatible C VOH =3.3V (typical) C VOL =0.3V (typical) ? Industrial Temperature: C40°C to +85°C ? 3.3V ±10% operation ? Packaging (Pb-free &

Green Available): C 20-pin 300-mil wide SOIC (S) C 20-pin 150-mil wide QSOP (Q) C 20-pin 209-mil wide SSOP (H) VCC B9 B8 GND B7 VCC B6 GND B5 B4 A GND B0 VCC B1 GND B2 VCC B3 GND

1 2

3 4

5 6

7 8

9 10

20 19

18 17

16 15

14 13

12 11 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 A PI49FCT3807 3.3V Fast CMOS Clock Driver

2 PS7010F 11/16/09 Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this speci?cation is not implied. Exposure to absolute maximum rating condi- tions for extended periods may affect reliability. DC Electrical Characteristics (TA = C40°C to +85°c VCC = 3.3V ±0.3V) Symbol Parameter Test Condition(1) Min. Typ. Max. Units VOH Output High Voltage VCC = Min., VIN = VIL or VIH IOH = -0.1mA IOH = -8mA VCC - 0.2 2.4 C 3.0 V VOL Output Low Voltage VCC = Min., VIN = VIL or VIH IOH = 0.1mA IOH = 16mA IOH = 24mA C 0.2 0.3 0.2 0.4 0.5 VIH Input High Voltage Guaranteed Logic HIGH Level (Input pins) 2.0 5.5 VIL Input Low Voltage Guaranteed Logic LOW Level (Input pins) -0.5 0.8 IIH Input High Current VCC = Max. VIN = VCC

1 μA IIL Input Low Current VCC = Max. VIN = GND -1 VIK Clamp Diode Voltage VCC = Min., IIN = -18mA -0.7 -1.2 V IOH Output HIGH Current(4,5) VOUT = 1.5V, VIN =VIL or VIH, VCC = 3.3V -35 -60 -110 mA IOL Output LOW Current(4,5) VOUT = 1.5V, VIN =VIL or VIH, VCC = 3.3V

50 90

200 IOS Short Circuit Current(4,5) VCC = Max., VOUT = GND -60 -135 -240 VH Input Hysteresis

150 mV Storage Temperature 65°C to +150°C Ambient Temperature with Power Applied 40°C to +85°C Supply Voltage to Ground Potential (Inputs &

VCC Only).....C0.5V to +7.0V Supply Voltage to Ground Potential (Outputs &

D/O Only) ..C0.5V to +7.0V DC Input Voltage 0.5V to +7.0V DC Output Current.120mA Power Dissipation.0.5W Notes: 1. For Max. or Min. conditions, use appropriate value speci?ed under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, +25°C ambient and maximum loading. 3. VOH = VCC C 0.6V at rated current. 4. This parameter is determined by device characterization but is not production tested. 5. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. PI49FCT3807 3.3V Fast CMOS Clock Driver

3 PS7010F 11/16/09 Power Supply Characteristics Parameters Description Test Conditions(1) Min. Typ(2) Max. Units ICC Quiescent Power Supply Current VCC = Max. VIN = GND or VCC ―

3 30 μA ΔICC Supply Current per Inputs @ TTL HIGH VCC = Max. VIN = VCC 0.6V(3) ― 2.0