PDF《JN516x-EK001 Evaluation Kit》

2 outlines the key concepts for an understanding of wireless networks. ? Chapter

3 describes how to use the evaluation kit to set up and run the ? pre-loaded Smart Home Demonstration. ? Chapter

4 provides guidance on where to go next in order to develop custom JN516x applications that can be run on the components of the kit. ? The Appendices provide: ? A reference of the operations and associated key sequences that can be performed from the wireless Remote Control Unit ? Guidance on re-programming the firmware of various kit components ? Compliance statements and documentation for certain kit components Conventions Files, folders, functions and parameter types are represented in bold type. Function parameters are represented in italics type. Code fragments are represented in the Courier New typeface. This is a Tip. It indicates useful or practical information. This is a Note. It highlights important additional information. About this Manual

6 ? NXP Laboratories UK

2014 JN-UG-3093 v1.4 Acronyms and Abbreviations API Application Programming Interface IP Internet Protocol JenNet Jennic Network layer protocol LAN Local Area Network PWM Pulse Width Modulation SDK Software Developer'

s Kit WAN Wide Area Network WPAN Wireless Personal Area Network 6LoWPAN IPv6 over Low power WPAN Related Documents JN-UG-3064 SDK Installation and User Guide JN-UG-3007 JN51xx Flash Programmer User Guide JN-AN-1162 JenNet-IP Smart Home Application Note Support Resources To access online support resources such as SDKs, Application Notes and User Guides, visit the Wireless Connectivity TechZone: www.nxp.com/techzones/wireless-connectivity All NXP resources referred to in this manual can be found at the above address, unless otherwise stated. Trademarks All trademarks are the property of their respective owners. JenNet and JenNet-IP are trademarks of NXP B.V.. This is a Caution. It warns of situations that may result in equipment malfunction or damage. JN516x-EK001 Evaluation Kit User Guide JN-UG-3093 v1.4 ? NXP Laboratories UK

2014 7 1. Introduction to the Evaluation Kit Welcome to the JN516x-EK001 Evaluation Kit, which is based around the NXP JN516x family of wireless microcontrollers. A Smart Home Demonstration is pre- loaded into certain kit components, allowing a small wireless network with IP connectivity to be quickly assembled and used. The evaluation kit can also be used in conjunction with NXP'

s range of Software Developer'

s Kits (SDKs) to develop new wireless network applications for the JN516x devices using any of the following protocols: ? IEEE 802.15.4 ? JenNet-IP ? ZigBee PRO (ZigBee Light Link, Home Automation and Smart Energy profiles) ? ZigBee RF4CE This chapter introduces you to the evaluation kit by describing: ? Typical wireless networks - see Section 1.1 ? Contents of the kit - see Section 1.2 ? Hardware features of the kit - see Section 1.3 ? Pre-loaded demonstration - see Section 1.4 Note: The pre-loaded Smart Home Demonstration is based on NXP'

s own JenNet-IP protocol. Demonstration applications for all the other supported protocols are available from NXP and can be run on the evaluation kit. Each is provided in an Application Note which can be downloaded from the NXP Wireless Connectivity TechZone (see Support Resources on page 6). For more details, refer to Chapter 4. Chapter

1 Introduction to the Evaluation Kit

8 ? NXP Laboratories UK

2014 JN-UG-3093 v1.4 1.1 Typical Networks The JN516x-EK001 Evaluation Kit can be used as a platform for developing a wide range of wireless network applications, where these applications run on JN516x devices embedded in the network nodes. Example networks are: ? A simple point-to-point network consisting of only two nodes - for a example, a wireless radio link between a remote control unit and a media player (e.g. using the ZigBee RF4CE protocol) ? A wireless network consisting of many nodes - for example, a wirelessly controlled heating system in a building (e.g. using a ZigBee PRO profile) ? A wireless network with IP connectivity - for example, a wirelessly controlled home lighting system that can also be accessed from the Internet (e.g. using the JenNet-IP protocol) The supported wireless network protocols are more fully introduced in Chapter 4. Figure 1: Point-to-Point Wireless Link Figure 2: Wireless Network Figure 3: Wireless Network with IP Connectivity Media Player (e.g. on a PC) Remote Control Unit Thermostat Heater Controller Heater Controller Switch Heater Controller IP Internet IP Border-Router Lamp Lamp Lamp Switch Switch JN516x-EK001 Evaluation Kit User Guide JN-UG-3093 v1.4 ? NXP Laboratories UK