PDF《Installation Instructions》

Installation Instructions WeatherShield? 1/2" FSJ and LDF Jumper to Antenna/Device

3 Revision B Inches

2 3

4 1 Millimeters

20 30

40 50

60 70

80 90

100 Installation Training Available at Andrew Institute Body shell Part description: Body Shell Part number: AWE-A12 Dimensions: mm Product size Length Height Diameter Internal Internal L H D diameter Di length Li (+/-1) (+/-0.

5) (+/-0.5) (+/-0.5) (+/-0.5) AWE-A12 140,7 23,9 84,8 36.5 112.3

4 1 The Andrew Weatherproofing Enclosure is a hermetically sealed device. Any moisture sealed into the kit will stay inside the enclosure. Wipe the inside of enclosure and all connections with a clean dry cloth before applying the unit to ensure the enclosure stays moisture free. Cable Diameter: 1/2" JUMPER CABLE FSJ ?min.

13 mm LDF ?max.

17 mm max. 93.5 mm min.

16 mm max. 23.5 mm max.

32 mm ? max.

26 6 Bulletin

237914 (Page

1 of 2) AWE-A12 Includes:

1 Enclosure

1 Grease packet Patent #6955558 Important: To ensure seal is not compromised, KEEP STRAIGHT. D H

5 Li L Di min.

11 mm landing space

2 Seals must be completely lubricated. Note: Use whole package Important: Ensure last tab is fully engaged. ±100 mm Horizontal Installation Note: Support jumper before routing. Minimum Bending Radius: 1/2" Superflex 1.25" (32 mm) 1/2" LDF 5" (125 mm) Vertical Installation Andrew Corporation

10500 West 153rd Street Orland Park, IL U.S.A.

60462 Telephone: 708/349-3300 FAX (U.S.A.): 1-800/349-5444 Internet: http://www.andrew.com Customer Service,

24 hours: U.S.A. ? Canada ? Mexico: 1-800/255-1479 U.K.:

0800 250055 Other Europe: +44

592 782

612 Printed in U.S.A. 9/05 Copyright ?

2005 by Andrew Corporation Notice: Andrew disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices. Aviso: Andrews no acepta ninguna obligación ni responsabilidad como resultado de prácticas incorrectas o peligrosas de instalación, inspección, mantenimiento o retiro. Avis : Andrew décline toute responsabilité pour les conséquences de procédures d'installation, d'inspection, d'entretien ou de retrait incorrectes ou dangereuses. Hinweis: Andrew lehnt jede Haftung oder Verantwortung für Sch?den ab, die aufgrund unsachgem??er Installation, ?berprüfung, Wartung oder Demontage auftreten. Aten??o: A Andrew abdica do direito de toda responsabilidade pelos resultados de práticas inadequadas e sem seguran?a de instala??o, inspe??o, manuten??o ou remo??o. Avvertenza: Andrew declina eventuali responsabilità derivanti dell'esecuzione di procedure di installazione, ispezione, manutenzione e smontaggio improprie o poco sicure. Bulletin

237914 (Page

2 of 2) Installation Instructions Revision B

1 2 Removing and Replacing

5 3 After initial installation, the enclosure can be re-entered and resealed. Before resealing wipe the inside of enclosure and all connections with a clean dry cloth.

4 Minimum Clearance Min. 2.2" (56 mm) Multiple Port Nesting min.

11 mm landing space Referance document number TP-100958-EN at www.andrew.com for more details. Seals must be completely lubricated. Note: Use whole package Part Number:

12225 To open WeatherShield release

4 tabs simultaneously by using both hands