PDF《100W 单路输出开关电源》

HENGFU CORPORATION 衡孚企业 www.

hengfu.com 100W Single Output Switching Power Supply 100W 单路输出开关电源 HF100W-SE Series HF100W-SE 系列 FEATURES 产品特性 ・Economical design, competitive price 经济型设计,高性价比 ・Compact size, high reliability 小体积,高可靠性 ・Built in EMI filter 内置 EMI 滤波器 ・Approvals: CE (LVD) 认证 ・Protections: overload/ over voltage/ short circuit 带过载、过压、短路保护 ・2 years warranty 两年质保 ・F605

160 x

98 x 39mm 外形尺寸 SPECIFICATIONS 规格书 Input Voltage 输入电压 170~264VAC (210~370VDC) Operating Temperature 工作温度 -20°C ~+70°C(ref. derating curve) -20°C ~+70°C(参见减额曲线) Input Current 输入电流 < 1.5A Storage Temperature 储存温度 -20°C ~+85°C Input Frequency 输入频率 47~63Hz Operating Humidity 工作湿度 20%~93%RH(non condensing) 20%~93%RH(无凝露) Inrush Current 启动冲击电流 cold start, 40A/230V 冷启动,40A/230V Storage Humidity 储存湿度 20%~95%RH(non condensing) 20%~95%RH(无凝露) Input Leakage Current 输入漏电流 < 0.7mA/230VAC MTBF 平均无故障工作时间 >100,000 hours >100,000 小时 Line Regulation (full load) 电网调整率(满载时) ± 0.5% Cooling 冷却方式 convection 自然冷却 Voltage Adjust Range 输出电压调节范围 ± 10% Safety Standards 安全标准 design meet GB4943, UL60950, EN60950 设计符合 GB4943, UL60950, EN60950 Output Overload Protection 输出过载保护 105~150%, hiccup mode, auto recovery 105~150%,打嗝模式,自恢复 Withstand Voltage 绝缘强度 I/P -O/P: 3.0KVAC/1min I/P - PE: 1.5KVAC/1min O/P-PE: 0.5KVAC/1min Output Over Voltage Protection 输出过压保护 115~150%, hiccup mode, auto recovery 115~150%,打嗝模式,自恢复 Vibration 振动 10~150Hz, 2G 10min/1cycle, 30min each along X, Y, Z axes 10~150Hz, 2G 10分钟/周期, 30分钟/X, Y, Z轴每个方向 Short Circuit Protection 短路保护 hiccup mode, auto recovery 打嗝模式,自恢复 Rise Time 上升时间 50ms Connection 接线端子 5P/9.5mm screw terminal block 螺丝接线式接线端子 Hold up Time 保持时间 20ms Mechanical Feature 机械特性 metal enclosed 金属外壳 Screw/Torque 螺丝/扭力 M4/ 1.2N.m Wire 接线范围 22-12AWG 4.0mm? Dimensions 外形尺寸

160 x

98 x 39mm (L x W x H)

160 x

98 x 39mm (长x宽x高) Packing 包装 0.43kgs每台, 30pcs/15kgs/ 0.031CBM per carton每箱 Model No. 型号 DC Output 直流输出 Rated Power 额定功率 Load Regulation 负载调整率 Voltage Tolerance 电压精度 Ripple & Noise (max.) 纹波和噪声 Efficiency 效率 HF100W-SE-12 12V 8.5A 102.0W 0.5% ± 1% 120mVp-p 81% HF100W-SE-15 15V 7.0A 105.0W 0.5% ± 1% 120mVp-p 82% HF100W-SE-18 18V 5.6A 100.8W 0.5% ± 1% 150mVp-p 83% HF100W-SE-24 24V 4.5A 108.0W 0.5% ± 1% 150mVp-p 83% HF100W-SE-27 27V 3.7A 99.9W 0.5% ± 1% 150mVp-p 84% HF100W-SE-36 36V 3.0A 108.0W 0.5% ± 1% 150mVp-p 84% HF100W-SE-48 48V 2.1A 110.4W 0.5% ± 1% 150mVp-p 85% HENGFU CORPORATION 衡孚企业 www.hengfu.com * 12~48VDC output all available 其它规格均可定制 NOTE 备注 1. All parameters are measured at 230VAC input, rated load and 25°C ambient temperature. 上述所有参数的测试条件为 230VAC 输入电压, 额定负载和 25°C 室温. 2. Line regulation is measured from low line to high line at rated load. 电网调整率是在额定负载条件下从低电网到高电网的输出电压变化率. 3. Load regulation is measured from 0% to 100% of rated load for single output models. For multi-output models, it is measured from 20% to 100% of rated load, and other output at 60% rated load. 负载调整率是负载电流从额定负载的 0% 到100%变化时的输出电压变化率. 4. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 纹波和噪声是用 20MHz 带宽的示波器,通过一根 12"长的末端并接 0.1uF 和47uF 电容的双绞线进行测量的. 5. The power supply is regarded as a component which will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 开关电源被视为整机的一个部件.整机是否符合 EMC 指令还需重新测试并验证. Derating Curve 减额曲线 HENGFU CORPORATION 衡孚企业 www.hengfu.com Drawing 安装图纸 Terminal Pin No. Assignment 接线端子排布: Pin No. 位号 Assignment 排布 Pin No. 位号 Assignment 排布