PDF《ENGLISH》

3 feet (1 metre) from the centre of your TV, and close to the front edge of the table or shelf. ? Do not put the sensor on your console. ? Do not place the sensor on or in front of a speaker or a surface that vibrates or makes noise. ? Keep the sensor out of direct sunlight. ? Do not touch the lens on the sensor. Fingerprints on the lens can decrease sensor performance ? Do not use near any heat sources. Use the sensor within its specified operating temperature range of

41 °F C

95 °F (5 °C C

35 °C). If the sensor is exposed to an environment outside its prescribed range, turn it off and allow the temperature to stabilise within the specified range before using?the sensor again. If you have a wall-mounted television and no table or cabinet to place the sensor on, you can use the Microsoft-approved wall- mount bracket (sold separately). Important Only adjust the sensor location by moving the base. Do not adjust the sensor viewing angle by hand, by tilting the sensor on its base. After setup is complete, let the sensor motors adjust the viewing angle, or you risk damaging your sensor. WARNING Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. When the sensor and console are not in use, you may need to disconnect all cables and cords from the sensor and console to keep them out of the reach of children and pets. Do not allow children to play with cables and cords. WARNING Avoid Glare To minimise eyestrain from glare, try the following: ? Position yourself at a comfortable distance from your television or monitor and the Kinect sensor. ? Place your television or monitor and Kinect sensor away from light sources that produce glare, or use window blinds to control light levels. ? Choose soothing natural light that minimises glare and eyestrain and increases contrast and clarity. ? Adjust your television or monitor brightness and contrast. Set Up Your Sensor Before you can use your Kinect sensor, you need to connect it to your Xbox

360 console. For Xbox

360 S consoles, power is supplied by the console. For original Xbox

360 consoles, you'

ll also need to connect the sensor to a standard wall outlet. Connect the Sensor to Your Xbox

360 S Console To connect to your Xbox

360 S console, simply plug the sensor into the console AUX port. Make sure you do not plug the sensor into a USB port. ENGLISH

2 Connect the Sensor to Your Original Xbox

360 Console The sensor only works with the back USB port on an original Xbox

360 console. To connect to your original Xbox

360 console:

1 Unplug any accessories from the back USB port on your console.

2 Plug the sensor into the USB/power cable.

3 Plug the USB/power cable into your console'

s back USB port.

4 Plug the AC adapter end of the USB/power cable into a wall?outlet. Use only the USB/power cable that is shipped with the product or is given to you by an authorised repair centre. If you have an original Xbox

360 console with no hard drive, you should also attach a storage device with at least

256 MB free space. You can use an Xbox

360 Hard Drive, Xbox

360 Memory Unit, or a USB flash drive. If you'

re using an Xbox

360 Wireless Networking Adapter that'

s already connected to the back USB port, you'

ll need to disconnect its USB cable and reconnect it to a front USB port using the WiFi extension cable, provided. To reconnect a wireless networking adapter to a front USB port, if?necessary:

1 Unplug the wireless networking adapter cable from the USB port on the back of the console, leaving the adapter itself attached to the console.