PDF《HLE-1XX-02-XXX-DV-XX-XX-XX》

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC.

THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. PROPRIETARY NOTE * * PATENT NUMBERS

5713755 /

5961339 3 MAX SWAY (EITHER DIRECTION)

2 MAX SWAY (EITHER DIRECTION) "A" "A" RHLE-50-D SEE NOTE

10 No OF POS x .100 [2.54] .200 5.08 REF .020 REF 0.51 .100 2.54 REF ({No of POS - 1} x .100 [2.54]) .005 [.13] C C-132-12-XXX +.008 [.20] -.005 [.13]

01 02 .144 3.66 .259 REF 6.58 90°±3° SECTION "A"-"A" C C SEE TABLE

2 .0625 1.588 .050 1.27 .010 REF 0.25 (No OF POS -2) x.1000 [2.540] .050 1.27

3 MAX SWAY (EITHER DIRECTION) SM-A10H LC-08-TM-01 C -A & -LC OPTION FIG

2 C HLE-1XX-02-XXX-DV-XX-XX-XX No OF POSITIONS -02 THRU -50 (PER ROW) ROW SPECIFICATION -DV: DOUBLE VERTICAL (USE RHLE-50-D) LEAD STYLE -02: SURFACE MOUNT (USE C-132-12-X) PLATING SPECIFICATION -G: 20?" GOLD IN CONTACT AREA 3?" ON TAIL (USE C-132-12-G) -S: 30?" SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL (USE C-132-12-S) -F: 3?" SELECTIVE FLASH GOLD IN CONTACT AREA MATTE TIN ON TAIL (USE C-132-12-F) -L: 10?" SELECTIVE LIGHT GOLD IN CONTACT AREA MATTE TIN ON TAIL (USE C-132-12-L) -H: 30?" HEAVY GOLD IN CONTACT AREA 3?" ON TAIL (USE C-132-12-H) -STL: 30?" SELECTIVE GOLD IN CONTACT AREA TIN/LEAD (90%/10 +/-5%) (USE C-132-12-STL) -SM: 30?" SELECTIVE GOLD IN CONTACT AREA MATTE TIN ON TAIL (USE C-132-12-S) -FM: 3?" SELECTIVE FLASH GOLD IN CONTACT AREA MATTE TIN ON TAIL (USE C-132-12-F) -LM: 10?" LIGHT GOLD IN CONTACT AREA MATTE TIN ON TAIL (USE C-132-12-L) OPTION -TR: TAPE & REEL (2 -

29 POSITIONS ONLY) OPTION OPTION -BE: BOTTOM ENTRY (USE RHLE-50-DBE)(SEE FIG. 5) (LEAVE BLANK FOR STANDARD) -P: PICK & PLACE PAD (POS -03 THRU -50 ONLY) -A: ALIGNMENT PIN (4 POS MIN) -LC: LOCKING CLIP (2 POS MIN) (SEE NOTE 9) -K: USE K-DOT-.256-.375-.005 POLYAMIDE FILM PAD (AVAILABLE ON POS -03 THRU -50;

.005 [.13] THICKNESS) (SEE FIG 4) FIG

5 -BE OPTION (SAME AS FIG

1 UNLESS OTHERWISE STATED) RHLE-50-DBE FIG

1 HLE-116-02-XXX-DV SHOWN C SHEET OF UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3]

3 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: [2.54] .100 TIGER BEAM SOCKET ASSEMBLY BY: HLE-1XX-02-XXX-DV-XX-XX-XX DWG. NO. DESCRIPTION: DO NOT SCALE DRAWING ED MESSER 12/19/98

2 1 SHEET SCALE: 2:1 BODY: VECTRA E130i CONTACT: BeCu F:\DWG\MISC\MKTG\HLE-1XX-02-XXX-DV-XX-XX-XX-MKT.SLDDRW NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. ALL IDENTIFICATION MARKS MUST NOT STAND GREATER THAN .002 [.05] OFF THE SURFACE OF THE PART. 3. PULL OUT FORCE FOR -LC, -A, & CONTACT IS

12 oz MIN. 4. COPLANARITY: SEE TABLE 2. 5. BURR ALLOWANCE: .003 [.08] MAX 6. CUT ASSEMBLIES AFTER FILL. CUT FLASH TO BE .010 MAX WITH NO FLASH ALLOWED IN HOLES OR EXTENDING BELOW LEADS. WILL LOSE A POSITION FOR EVERY CUT MADE ON A SOCKET STRIP. 7. TUBE POSITIONS

03 THRU 50. LAYER PACKAGE POSITION 02. 8. ENDWALL THICKNESS: .030+/-.005[.76+/-.13] TO BE MEASURED FROM BOTTOM VIEW. 9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE CLC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE CLC OPTION. 10. SAMTEC LOGO MAY NOT BE PRESENT ON CUT TO POSITION CONNECTORS.

520 PARK EAST BLVD, NEW ALBANY, IN

47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: