编辑: 雷昨昀 | 2019-07-11 |
1 Section
2 Section
3 Section
4 Section
5 Section
6 Section
8 Section
7 vi One Liter Water Still Thermo Scientific Still Output Connections 9-1 Storage Bottle Installation 9-1 Automatic Collection System Installation 9-2 ACS Installation (continued)9-3 Operation 10-1 High Temperature Cut-off Switch 10-3 Maintenance and Servicing 11-1 Troubleshooting - General 11-3 Still Troubleshooting 11-4 Electrical Troubleshooting 11-4 ACS Troubleshooting 11-5 Parts List and Diagrams 12-1 Ordering Procedures 12-2 Table of Contents Section
9 Section
10 Section
11 Section
12 One Liter Water Still 1-1 Thermo Scientific Section
1 Important Information This manual contains important operating and safety information. You must carefully read and understand the contents of this manual prior to the use of this equipment. Water purification technology employs one or more of the following: chemicals, electrical devices, mercury vapor lamps, steam and heated vessels. Care should be taken when installing, operating or servicing Thermo Scientific products. The specific safety notes pertinent to this product are listed in the next section. Refer to the illustration on the following page. 1-2 One Liter Water Still Thermo Scientific Section
1 Important Information Figure 1-1. MEGA-PURE One Liter Still One Liter Water Still 2-1 Thermo Scientific Section
2 Safety Information Your Thermo Scientific MEGA-PURE One Liter Water Still has been designed with function, reliability, and safety in mind. It is your responsibility to install it in conformance with local electrical codes. For safe operation, pay attention to Notes, Cautions and Warnings throughout the manual. Warnings To avoid electrical shock, always: 1. Use a properly grounded electrical outlet of correct voltage and current handling capacity. 2. Ensure that the equipment is connected to electrical service according to local and national standards. Failure to properly connect may create a fire or shock hazard. 3. Do not mount the MEGA-PURE One Liter Water Still directly over equipment that requires electrical service. Routine maintenance of this unit may involve water spillage and subsequent electrical shock hazard if improperly located. 4. Replace fuses with those of the same type and rating. 5. Disconnect from power supply befor........