PDF《RC800》

(三)同步转换发射和接收频道模式 将遥控切频数据线连接 RC800 DATA OUT 与航模 遥控接收器的第

7 通道 , 可实现用航模遥控器切换空中音视 频发射与地面接收的频道.(此功能需客户多配一个航模遥 控接收器在地面才能使用). 将遥控切频数据线连接 RC800 DATA OUT 与航模 遥控器的校验接口 , 可实现用 RC800 的FR 和CH 按键来 同时切换空中发射和本身接收的频道. 此功能适用于 FUTABA 的遥控器与遥控接收器 , 且 发射的空切数据线要连接到航模遥控接收器的第

7 通道.

(四)连接 AAT 天线组合自动跟踪信号模式 将AAT 连接线把 RC800 与AAT 天线连接起来 , 为AAT 天线提供接收数据. 注:RC800 的AAT 接口使用 6.0MHz 的伴音通道传 输,如果你的图传发射是单声道的 6.5MHz, 请将 AAT 天线 的输入连接到 RC800 的AV OUT 接口配合使用. 规格系统 视频尺寸:PAL(720*576)、NTSC(720*480) 动态影像:MP4, 单音频 存储器:内存(约128MB)、MiniSD(TF)Card最大支持32GB 无线接收: 5.8G

32 频道 -90dBm 接收灵敏度 LCD 7″ 800*480 高清屏 输入和输出接口AV 输出 : 单声道、视频输出 AV 输入 : 单声道、视频输入 DC IN:7-28V AAT 接口 ANT: RPSMA 内针 SMA 头DATA OUT 接口 USB 通信 :USB2.0 OPERATING MANUAL RC800 5.8G

32 频道无线接收 DVR

7 寸FPV 显示屏 DVR operating manual

(一)Functions &

Accessories sketch

(二)Menu Loop Record Date Stamp Memory Info Format Language Date/Time Default Beep TV Standard Auto Power Off Battery Type Remoter Type LCD Brightness LCD Full Screen Version

(三)Volume Adjustment

(四)Wireless receiving mode

(五)AV-IN mode

(六)Video Recording

(七)Video playback Playback Playback Menu Delete Lock Unlock Thumbnail

(八) Indicator light Others

(一)Connected with PC

(二)Connected with TV

(三)Synchronous switching transmitter receiver channels

(四)Connected with AAT antenna Specifications Functions&

Accessories sketch: 1.Accessories sketch: 2.Connector &

bottoms:

(二)Menu Press MENU to enter the menu. Press FR( ) and CH( ) to choose, press OK() to set. Loop Record Start loop record function and press OK() to record,when memory is full occupied,it will delete the earliest document,and continue new record until press OK()again to stop or power off automatically. Please insert a large capacity memory card (Over 2GB will be better). When start this function,Application will calculate available memory to record,if less than

2 minutes,the earliest document will be delete automatically to release the space to make a new record. Document will be divided to

2 minutes per piece during the continuous recording mode,It will delete

2 pieces at least to release enough space,a suspend will be allowed during deleting,Please wait till restart recording mode automatically. Date Stamp Date Stamp can print the date/time stamp on the video screen during the record. Caution : Adjust the time and date before Date Stamp function. Memory Info Memory Info to check the memory card of spatial information. Format Perform formatting operation will delete all files in the current storage,please backup your documents to other storage devices before formatting. Formatting can only format the current working memory. Language Please select the appropriate language in the menu. Languages:English、Chinese(Simplified)、 Chinese(Traditional)、German、French. Date/Time Press FR( ) and CH( ) to set numbers, press OK() to confirm. Please set the time and date before use to make sure all document will be stored in the correct date and time field. Default System restore to factory settings. Beep Prompt tone will be allowed in the menu when this works on. TV Standard Set recording size Optional:PAL(720*576)、NTSC(720*480) Auto Power Off To set power off time automatically when without signal:5 Minutes、3 Minutes、1 Minutes. Battery Type Low power protection function,Please choose your battery 3S、4S、5S、6S;