PDF《COMPACT》

COMPACT Commercial 0.

75-6 Ton Water Source/Geothermal Heat Pump Submittal Data English Language/IP Units SD1022AN 01/13 WaterFurnace works continually to improve its products. As a result, the design and speci?cations of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and speci?cations. Purchaser'

s approval of this data set signi?es that the equipment is acceptable under the provisions of the job speci?cation. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely WaterFurnace'

s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com. Contractor: P.O.: Engineer: Project Name: Unit Tag: SD1022AN 01/13

2 Page _____ of _____ Envision2 Compact Commercial 0.75-6 Tons 60Hz Model Nomenclature 1-2 NB 4-6

036 7 T

8 L

9 0

10 0

11 0

12 C

13 A

14 N

15 A

16 N

17 1 21-22 SS

18 A

19 1

20 0

23 A

3 V Model Type NB = Envision2 Compact Cabinet Configuration V = Vertical H = Horizontal Unit Capacity Single Speed 009, 012, 015, 018, 024, 030, 036, 042, 048, 060,

070 Dual Capacity 026, 038, 049, 064,

072 Discharge Configuration T = Top (vertical) E = End (horizontal) S = Side (horizontal) Return Air Configuration L = Left R = Right Voltage

0 = 208-230/60/1

2 = 265-277/60/1 (009-038)

3 = 208-230/60/3 (024-072)

4 = 460/60/3 (024-072)

5 = 575/60/3 (PSC only 042, 048, 060, 070) Refrigeration Option

0 = None

2 = HWG only w/o pump (Vertical 018-070) G = Hot Gas Bypass (015-072) R = Hot Gas Reheat (015-072) B = Hot Gass Bypass w/ Hot Gas Reheat (015-072) Blower Option

0 = PSC Blower (single speed)

1 = Variable Speed ECM Blower (015-072)

2 = High Static Variable Speed ECM Blower (036, 038, 042, 048, 049)

3 = High Static PSC Blower (024, 030, 036, 042, 048)

4 = 5-Speed ECM Blower (015-072) Water Coil Option C = Copper D = Insulated Copper N = Cupronickel P = Insulated Cupronickel NOTES: Phase guard only available on 208-230/60/3, 460/60/3, and 575/60/3 Vintage A = PSC &

5-Speed ECM Motor B = Variable Speed ECM Motor Non-Standard Option Details SS = Standard Option Drain Pan Option

0 = Composite, No Secondary Connection

1 = Composite, Secondary Connection

2 = Stainless Steel, No Secondary Connection

3 = Stainless Steel, Secondary Connection Air Coil Option

1 = Standard

2 = FormiShield? Filter Option A = MERV

4 B = MERV

13 Cabinet Option

0 = Unpainted Cabinet, Filter Rail

1 = Painted Cabinet, Filter Rail

2 = Unpainted Cabinet, 4-sided Filter Rack

3 = Painted Cabinet, 4-sided Filter Rack Electrical Option N = None A = IntelliStart? Only E = IntelliStart and Disconnect P = Phase Guard, No Disconnect B = Phase Guard, Disconnect D = No Phase Guard, Disconnect Controls Option A = AuroraTM Base Control (ABC)

4 = FX10 std. no communication

5 = FX10 w/ Open N2 Com Card

6 = FX10 w/ LonWorks Com Card

7 = FX10 w/ BacNet Com Card Water Control Option N = None R = Water Flow Regulator V = 2-Way Valve B = 2-Way Valve w/ Water Flow Regulator Sound Kit Option A = None B = Sound Kit Rev.:

04 January 2013D WaterFurnace works continually to improve its products. As a result, the design and speci?cations of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-888-929-2837 for latest design and speci?cations. Purchaser'

s approval of this data set signi?es that the equipment is acceptable under the provisions of the job speci?cation. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely WaterFurnace'