PDF《Advisory Circular》

Published by Civil Aviation Authority PO Box

3555 Wellington

6140 Authorised by Manager International &

Regulatory Strategy Advisory Circular AC21-1 Appendix

2 Revision

6 Product Certification―Type Acceptance Certificates (Appendix

2 to AC21-1)

16 April

2018 General Civil Aviation Authority advisory circulars contain guidance and information about standards, practices, and procedures that the Director has found to be an acceptable means of compliance with the associated rules and legislation.

However, the information in the advisory circular does not replace the requirement for participants to comply with their obligations under the Civil Aviation Rules, the Civil Aviation Act

1990 and other legislation. An advisory circular reflects the Director'

s view on the rules and legislation. It expresses CAA policy on the relevant matter. It is not intended to be definitive. Consideration will be given to other methods of compliance that may be presented to the Director. When new standards, practices, or procedures are found to be acceptable, they will be added to the appropriate advisory circular. Should there be any inconsistency between this information and the rules or legislation, the rules and legislation take precedence. An advisory circular may also include guidance material generally, including guidance on best practice as well as guidance to facilitate compliance with the rule requirements. However guidance material must not be regarded as an acceptable means of compliance. An advisory circular may also include technical information that is relevant to the rule standards or requirements. Purpose This advisory circular provides a list of aircraft, engine and propeller types and models that have been issued with type certificates or type acceptance certificates in New Zealand. This material is intended to assist organisations and persons in determining the current status of an aircraft or product for operation or installation in New Zealand. Related Rules This advisory circular relates specifically to Civil Aviation Rule Part 21, Subparts B and H Change Notice Revision

6 updates the model listings and State-of-Design acceptance basis, particularly for EASA type certificates. Advisory Circular AC21-1 Appendix

2 Revision

6 16 April

2018 CAA of NZ

2 Table of Contents 1. Introduction.3 2. Type Certificates.3 3. Model/Manufacturer Designations.3 4. Type Acceptance Reports.4 5. Validity of Type Acceptance

5 Table

1 C List of Aircraft Models for which Type Certificates and Type Acceptance Certificates have been issued.6 Table

2 C List of Engine Models for which Type Acceptance Certificates have been issued.25 Table

3 C List of Propeller Models for which Type Acceptance Certificates have been issued

31 Table

4 C Type Certificate National Aviation Authority Reference Codes ......

36 Advisory Circular AC21-1 Appendix

2 Revision

6 16 April

2018 CAA of NZ

3 1. Introduction This advisory circular, which is referred to as Appendix

2 in AC21-1 Product Certification- Type Acceptance Certificates, provides a list of aircraft, engine and propeller models and variants that have been granted type certificates or type acceptance certificates in New Zealand in accordance with Subpart B of Part 21. This AC21-1 Appendix

2 will be updated on a regular basis but recent additions to the list of models may not be shown between these updates. Any new aircraft, engine or propeller models, which have been type accepted since the publication of this advisory circular, will be found in the applicable type acceptance report on the CAA website. AC21-1 Appendix