PDF《刘金旭北京市海淀区中关村南大街 5 号北京 联系地址：_刘金旭》

参研项目 [13] 高强度自锐化新型**材料研究 ,国防基础科研项目 2006-2010 [14] 穿甲弹**与药型罩**材料研究 ,总装备部十一五预研项目 2006-2010 [15] **药型罩材料研究 ,总装备部十二五预研项目,2011-2015 [16] **材料与**装药匹配技术 ,总装备部

086 项目,2012-2015 年[17] **分散粒子系剪切增稠流变液体的研制及其在防护领域的应用研究 ,爆炸科学与技术国家重点实验 室自主科研项目,2012.1-2014.12;

[18] **专用材料和成型工艺研究 ,国防科工局军工民口配套项目, 2010-2012. 论文专著 [1] Liu Jinxu, Li Shukui*, Zhou Xiaoqing, Zhang Zhaohui, Zheng Haiyun, Wang Yingchun. Adiabatic shear banding in a tungsten heavy alloy processed by hot-hydrostatic extrusion and hot torsion. Scripta Materialia. 2008, 59(12):1271-1274 (SCI) [2]Liu Jinxu, Li Shukui*, Fan Ailing, Sun Hongchan. Effect of fibrous orientation on dynamic mechanical properties and susceptibility to adiabatic shear band of tungsten heavy alloy fabricated through hot-hydrostatic extrusion. Materials Science and Engineering A. 2008, (487):235-242 (SCI) [3]Liu Jinxu, Li Shukui*, Guo Wei, Zheng Haiyun, Ni Fang, Sun Changqing. Susceptibitlity to adiabatic shear band of tungsten heavy alloy fabricated through hot-hydrostatic extrusion and cold torsion. Rare Metal Materials and Engineering. 2008, 37(8):1360-1363 (SCI) [4]刘金旭, 李树奎*, 倪芳. 热挤压钨合金的组织性能研究. 稀有金属材料与工程. 2007, 36(11):2041-2044 (SCI) [5] 刘金旭, 李树奎*, 郑海云, 宋修纲, 倪芳, 陈忠恺, 朱本强. 热挤压钨合金纤维方向对绝热剪切特性的 影响规律及机理研究. 稀有金属材料与工程. 2009, 38(1):157-160 (SCI) [6]Zhou Xiaoqing, Li Shukui, Liu Jinxu*, Wang Yingchun, Wang Xing Self-sharpening behavior during ballistic impact of the tungsten heavy alloy rod penetrators processed by hot-hydrostatic extrusion and hot torsion. Materials Science and Engineering A.2010 (527):4881-4886 (SCI) [7] Liu Jinxu*, Li Shukui, Zhou Xiaoqing, Wang Yingchun, Yang Jia. Dynamic Recrystallization in the Shear Bands of Tungsten Heavy Alloy processed by Hot-hydrostatic Extrusion and Hot Torsion. Rare Metal Materials and Engineering.2011,40(6): 0957-0960 (SCI) [8] Shukui Li, Jinxu Liu*, Jie Yang, Lili Yan. Dynamic behaviors of fiber reinforced aerogel and Mg/aerogel composites. Proceedings of the SEM Annual conference June 7-10,

2010 Indianapolis, Indiana USA (EI) [9] Guo Wenqi, Liu Jinxu*,Yang Jia, Li Shukui. Effect of initial temperature on dynamic recrystallization of tungsten and matrix within adiabatic shear band of tungsten heavy alloy. Materials Science and Engineering A.

2011 (528): 6248-6252 (SCI) [10] Qiurong Yang, Jinxu Liu*, Shukui Li, Fuchi Wang, Tengteng Wu. Fabrication and mechanical properties of Cu-coated woven carbon fibers reinforced aluminum alloy composite. Materials and Design

2014 (57): 442-448 (SCI) [11] Jinxu Liu*, Jia Yang, Jingyi Zhou, Shukui Li and Wenqi Guo. Adiabatic shear banding of hot-extruded tungsten heavy alloy under cryogenic temperature. Rare Metals.

2012 (31): 17-21 (SCI) [12] Bai Xi, Liu Jinxu? , Li Shukui, Lv Cuicui, Guo Wenqi, Wu Tengteng. Effect of interaction mechanism between jet and target on penetration performance of shaped charge liner. Materials Science and Engineering A. 2012(553) 142-148 (SCI) [13] 周静怡,刘金旭*,李树奎,白曦. 爆炸加载条件下 CVD 高纯钨的变形机制. 稀有金属材料与工 程,2013, 42(1):80-83 (SCI) [14] Guo Wenqi, Liu Jinxu*, Li Shukui, Wang Yingchun, Ji Wei. Microstructural evolution and deformation mechanism of the