PDF《220V: 0.4~1.5KW》

220V: 0.

4~1.5KW 380V: 0.75~2.2KW ECM系列变频器 用户手册 V1.1 浙江易控电子科技有限公司 ZHE JIANG EACN ELECTRONIC TECHNOLOGY CO.,LTD. 全国统一服务热线:400-166-0573

邮箱:[email protected] 制造商: ECM ECM 目录 目录目录 1.前言.1 1.1购入时注意事项

2 1.2ECM系列铭牌说明.2 2.安全使用注意事项.3 2.1送电前.3 2.2送电中.4 2.3运转中.4 3.产品标准规格.6 3.1产品个别规格.6 3.2产品通用规格.6 4.储存及安装.8 4.1储存.8 4.2安装场所及环境.8 4.3安装空间与方向.8 4.4产品尺寸.9 5.配线.10 5.1主回路配线图.10 5.2接线端子说明.11 5.3基本配线图.12 5.4配线注意事项.13 6.数位操作器说明.15 6.1数位操作器说明.15 6.2显示项目说明.15 6.3操作说明.16 7.试运行.18 7.1运行前检查.18 7.2试运行方式.18 8.功能一览表.19 9.功能说明.25 10.MODBUS 通讯规约.61 11.保养维护、故障信息及排除方法.68 11.1保养检查注意事项.68 11.2定期检查项目.68 11.3故障信息及排除方法.68 11.4故障及分析.70 12.周边设施选用及配置.73 12.1选件.73 12.2配置.73 13.附录.75 附录一:简单应用举例.75 附录二:例ECM变频器参数设置说明.81 ? ?

1 ? ?

2 因公司产品更新,本册内容若有更改,恕不另行通知. ECM 1. Introduction Thank you for purchasing and using the general-purpose inverter of ECM series of multi-functions and high performance. Please read carefully the operation manual before putting the inverter to use so as to correctly install and operate the inverter, give full play to its functions and ensure the safety. Please keep the operation manual handy for future reference, maintenance, inspection and repair. Due to the inverter of a kind of electrical and electronic product it must be installed, tested and adjusted with parameters by specialized engineering persons of motors. The marks of Danger , Caution and other symbols in the manual remind you of the safety and prevention cautions during the handling, installation, running and inspection. Please follow these instructions to make sure the safe use of the inverter. In case of any doubt please contact our local agent for consultation. Our professional persons are willing and ready to serve you. The manual is subject to change without notice. Danger indicates wrong use may kill or injure people. !Caution indicates wrong use may damage the inverter or mechanical system. Be sure to turn off the input power supply before wiring. Do not touch any internal electrical circuit or component when the charging lamp is still on after the AC power supply is disconnected, which means the inverter still has high voltage inside and it is very dangerous. Do not check components and signals on the circuit boards during the operation. Do not dissemble or modify any internal connecting cord, wiring or component of the inverter by yourself. Be sure to make correct ground connection of the earth terminal of the inverter. Never remodel it or exchange control boards and components by yourself. It may expose you to an electrical shock or explosion, etc. !Caution Do not make any voltage-withstanding test with any component inside the inverter. These semi-conductor parts are subject to the damage of high voltage. Never connect the AC main circuit power supply to the output terminals U.V. W of the inverter. The main electric circuit boards of CMOS and IC of the inverter are subject to the effect and damage of static electricity. Don'

t touch the main circuit boards. Installation, testing and maintenance must be performed by qualified professional personnel. The inverter should be discarded as industrial waste. It is forbidden to burn it. Introduction Introduction Danger ECM ? ?