PDF《Single-Output 5000 W GPIB》

Reliable DC power for manufacturing test and long-term burn-in This series of

5000 watt DC power supplies has the exceptional, proven reliability that test system engineers look for.

It also has the features needed for easy test system integration. Programming of the DC output and the extensive protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to

16 power supplies can be connected through one GPIB address. Test system integration can be further simplified by using the VXIPlug&Play drivers. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes. The 6680A Series has extremely low ripple and noise for a

5000 watt DC power supply. This helps the built-in measurement system make extremely accurate current and voltage measurements. Selectable compensation is provided for problem-free powering of inductive loads. High Performance DC Power Supplies speed and accuracy for test optimization Specifications (at 0? to 55?C unless otherwise specified) 6680A 6681A 6682A 6683A 6684A 6680A- J04 Special Order Option More detailed specifications at www.agilent.com/find/6680

63 Low output ripple and noise Selectable compensation for inductive loads Analog control of output voltage and current Fan-speed control to minimize acoustic noise Built-in measurements and advanced programmable features Protection features to ensure DUT safety 6680A-6684A Single-Output

5000 W GPIB Number of outputs

1 1

1 1

1 1 GPIB Yes Yes Yes Yes Yes Yes Output ratings Voltage

0 to

5 V

0 to

8 V

0 to

21 V

0 to

32 V

0 to

40 V

0 to 3.3 V Current (40?C then derate linearly

0 to

875 A

0 to

580 A

0 to

240 A

0 to

160 A

0 to

128 A

0 to

1000 A 1%/?C from 40?C to 55?C) Programming accuracy at 25?C ±5?C Voltage 0.04% +

5 mV

8 mV

21 mV

32 mV

40 mV

5 mV Current 0.1% +

450 mA

300 mA

125 mA

85 mA

65 mA

450 mV Ripple and noise constant voltage mode from

20 Hz to

20 MHz rms 1.5 mV 1.5 mV 1.5 mV 1.0 mV 1.0 mV 3.4 mV Peak to peak

10 mV

10 mV

10 mV

10 mV

10 mV

15 mV Readback accuracy at 25?C ±5?C (percent of reading plus fixed) Voltage 0.05% + 7.5 mV

12 mV

32 mV

48 mV

60 mV 7.5 mV Current 0.1% +

600 mA

400 mA

165 mA

110 mA

90 mA

600 mA Load and line regulation Voltage 0.002% + 0.19 mV 0.3 mV 0.65 mV 1.1 mV 1.5 mV 0.19 mV Current 0.005% +

65 mA

40 mA

17 mA

12 mA

9 mA

77 mA Transient response time Less than

900 ?s for the output voltage to recover within

150 mV following a change in load from 100% to 50%, or 50% to 100% of the output current rating of the supply Supplemental Characteristics (Non-warranted characteristics determined by design that are useful in applying this product) Ripple and noise constant current mode from

20 Hz to

20 MHz rms

290 mA

190 mA

40 mA

28 mA

23 mA ― Average programming resolution Voltage 1.35 mV 2.15 mV 5.7 mV 8.6 mV 10.8 mV

12 mV Current

235 mA

155 mA

64 mA

43 mA

34 mA

260 mA OVP

30 mV

45 mV

120 mV

180 mV

225 mV

25 mV Output voltage programming response time

9 ms

12 ms

45 ms

60 ms

60 ms

9 ms (excludes command-processing time) Full-load progrmming rise or fall time (10 to 90% or

90 to 10%, resistive load) Output common-mode noise current rms 1.5 mA 1.5 mA

3 mA