PDF《Single-Output 5000 W GPIB》

3 mA

3 mA 2.0 mA (to signal-ground peak-to-peak

10 mA

10 mA

20 mA

20 mA

20 mA 12.5 mA binding post) Note 1: Option 6680A-JO4 is not available outside the USA because certification process is not complete.

64 Application Notes: 6671A/72A/81A/82A/90A System DC Power Supplies Product Overview 5988-3050EN Agilent DC Power Supplies for Base Station Testing 5988-2386EN

10 Practical Tips You Need to Know About Your Power Products 5965-8239E Supplemental Characteristics for all model numbers DC Floating Voltage: Output terminals can be floated up to ±60 Vdc maximum from chassis ground Remote Sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the voltage available for the load. Command Processing Time: Average time required for the output voltage to begin to change following receipt of digital data is

20 ms for power supplies connected directly to the GPIB Modulation: (analog programming of output voltage and current): Input Signal:

0 to C5 V for voltage,

0 to +5 V for current Input Impedance:

30 k?/or greater AC Input (47 to

63 Hz):

180 to

235 Vac (line-to-line,

3 phase), 27.7 A rms maximum worst case, 21.4 A rms nominal;

360 to

440 Vac, 14.3 A rms maximum worst case, 10.7 A rms nomi- nal (maximum line current includes 5% unbalanced phase voltage condition.) Output voltage derated 5% at

50 Hz and below

200 Vac. Input Power:

7350 VA and

6000 W maximum;

160 W at no load GPIB Interface Capabilities: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, E1, and C0. IEEE-488.2 and SCPI command set. Software Driver: ?IVI-COM ?VXIPlug&Play Size: 425.5 mm W x 221.5 mm H x 674.7 mm D (16.75 in x 8.75 in x 25.56 in) Weight: Net, 51.3 kg (113 lbs);

shipping, 63.6 kg (140 lbs) Warranty Period: One year Ordering Information Opt

208 180 to

235 Vac,

3 phase,

47 to

63 Hz Opt

400 360 to

440 Vac,

3 phase,

47 to

63 Hz Opt

602 Two Bus Bar Spacers for paralleling power supplies (p/n 5060-3514) * Opt

908 Rack-mount Kit (p/n 5062-3977 and p/n 5062-3974) Single-Output:

5000 W GPIB (Continued) More detailed specifications at www.agilent.com/find/6680 High Performance DC Power Supplies speed and accuracy for test optimization * Opt

909 Rack-mount Kit with Handles (p/n 5063-9221 and p/n 5063-9219). Opt 0L1 Full documentation on CD-ROM, and printed standard documentation package Opt 0L2 Extra copy of standard printed documentation package Opt 0B0 Full documentation on CD-ROM only Opt 0B3 Service Manual * Support rails required Accessories p/n 5060-3513 Three 30-A Replacement Fuses for

180 to

235 Vac line p/n 5060-3512 Three 16-A Replacement Fuses for

360 to

440 Vac line E3663AC Support rails for Agilent rack cabinets p/n 5080-2148 Serial link cable 2m (6.6 ft.) Side Output Buss Bars Top 12.7mm 0.5" 28.6mm 1.13" 30.2mm 1.19" 65.1mm 2.56" 27.8mm 1.09" 9.5mm 0.38" 12.7mm 0.5" 674.7mm 26.56" 667.3mm 26.27" 574mm 22.6" 221.5mm 8.75" 425.5mm 16.75" Buss Bar Detail + C Rear 3/8" Diameter (6)

3 3/4" Agilent Models: 6680A, 6681A, 6682A, 6683A, 6684A Your Requested Excerpt from the Agilent System and Bench Instruments Catalog

2006 The preceding page(s) are an excerpt from the

2006 System and Bench Instruments Catalog. We hope that these pages supply the information that you currently need. If you would like to have further information about the extensive selection of Agilent DC power supplies, please visit www.agilent.com/find/power to print a copy of the complete catalog, or to request that a copy be sent to you. You will also find a lot of other useful information on this Web site. In the full System and Bench Instruments Catalog, you will find that Agilent offers much more than DC power supplies. This catalog contains detailed technical and application information on digital multimeters, DC power supplies, arbitrary waveform generators, and many more instruments. If you need basic, clean, power for your lab bench, it's there. In each power product category we have also integrated the capabilities you need for a complete power solution, including extensive measurement and analysis capabilities. Please give us a call at your local Agilent Technologies sales office, or call a regional office listed, for assistance in choosing or using Agilent power products. Keep up to date with Agilent's Test and Measurement Email Updates As an Email Update subscriber, you will receive periodic customized email updates that match the areas of interest that you have specified. Your update will include products and services, applications and support information, events and promotions. Sign up today at www.agilent.com/find/emailupdates. Check off DC power supplies, AC power sources or electronic loads on your registration form, and we will promptly let you know what's new in power products. Our Privacy Statement at www.agilent.com/go/privacy describes our commitment to you regarding your privacy. www.agilent.com For more information on Agilent Technologies' products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Phone or Fax United States: (tel)