PDF《*请确保电脑已连接互联网》

在Windows 以Wi-Fi 连接安装 MG3070 驱动程式步骤 (以Win

10 作示) MG3070 printer driver Installation Guide for Windows via Wi-Fi (Win

10 as example) *请确保电脑已连接互联网 *Please make sure computer already connected to the internet 点击以下连结下载有关之驱动程式: http://ugp01.

c-ij.com/ij/webmanual/WebPortal/PTL/ptl- setup.html?lang=tc&type=setup&area=hk&model=mg30&os=w Click below link to download printer driver: http://ugp01.c-ij.com/ij/webmanual/WebPortal/PTL/ptl- setup.html?lang=en&type=setup&area=hk&model=mg30&os=w 下载及安装步骤 1. 按一下"下载",下载完成后开启该档案安装 Click "Download", and open the file after download completed 2. 按"开始设定" Click "Start Setup" 3. 选择"亚洲"、"香港特别行政区",按"下一步" Select "Asia", "Hong Kong SAR China", and click "Next" 4. 按"是" Click "Yes" 5. 可选择是否同意作传送资讯至 Canon Extended Survey Program Select "Agree" or "Disagree" to send information to Canon Extended Survey Program 6. 勾选"停用封锁",按"下一步" Select "Deactivate the block", and click "Next" 7. 选择"无线 LAN 连接",按"下一步" Select "Wireless LAN Connection", and click "Next" 8. 确定印表机已开启,然后按"下一步" Make sure printer is on, and click "Next" 9. 如清单上有印表机,剔选印表机后按"下一步",然后跳至步骤 22.如清单上没有印表机,则 继续下一步骤 If printer is on the list, select the printer, click "Next", and then jump to step 22. Otherwise, go to next step 10. 确认已点选"根改仙瓒ㄍ妨",然后按"下一步" Make sure "Set up the network connection according to the guide" is selected, and click "Next" 11. 如印表机上 Wi-Fi 指示灯闪烁,按印表机上停止"Stop"按钮一下,然后按"下一步" If the Wi-Fi lamp on the printer is flashing, press the "Stop" button one time. Click "Next" 12. 请跳过此步骤,按"下一步" Please skip this step, and click "Next" 13. 请跳过此步骤,按"下一步" Please skip this step, and click "Next" 14. 请等待完成印表机网路设定 Please wait for the completion of printer wireless setup 15. 按"下一步" Click "Next" 16. 如印表机上 Wi-Fi 指示灯闪烁,按印表机上停止"Stop"按钮一下,然后按"下一步" If the Wi-Fi lamp on the printer is flashing, press the "Stop" button one time. Click "Next" 17. 按"使用 USB 电缆线的无线设定" Click "Wireless Setup Using the USB Cable" 18. 将印表机以 USB 线连接电脑,并确保印表机电源已开启 Connect printer and computer with USB cable, and make sure the printer is on 19. 请等等 Please Wait 20. 连接已完成,按"下一步" Connection is completed, and click "Next" 21. 如果 USB 电缆线连接到印表机,拔除电缆线,然后按"下一步" If the USB cable is connected to the printer, disconnect it, and then click "Next" 22. 请等待安装精灵完成印表机驱动程式安装 Please wait for setup wizard to accomplish the printer driver installation 23. 按"执行"进行列印头校准,然后按"下一步"或直接按"下一步" 跳过此步骤 Click "Execute" for Print Head Alignment, then click "Next" or click "Next" directly to skip this step 24. 按"执行"列印测试页,然后按"下一步"或直接按"下一步" 跳过此步骤 Click "Execute" for printing a test page, then click "Next" or click "Next" directly to skip this step 25. 驱动程式安装完成,建议勾选"设定为预设印表机",按"下一步" Driver installation is completed. We recommend you to select "Set as default printer", and click "Next" 26. 勾选所需软件,按"下一步" Select needed software, and click "Next" 27. 按"下一步" Click "Next" 28. 安装成功,然后按"结束" Installation is completed, then click "Finish" -完- -End-