PDF《www.ti.com》

four 64-bit general-purpose timers each configurable (one configurable as watchdog);

a configurable 16-bit host port interface (HPI) ;

up to

9 banks of

16 pins of general-purpose input/output (GPIO) with programmable interrupt/event generation modes, multiplexed with other peripherals;

three UART interfaces (each with RTS and CTS);

two enhanced high-resolution pulse width modulator (eHRPWM) peripherals;

3 32-bit enhanced capture (eCAP) module peripherals which can be configured as

3 capture inputs or

3 auxiliary pulse width modulator (APWM) outputs;

and

2 external memory interfaces: an asynchronous and SDRAM external memory interface (EMIFA) for slower memories or peripherals, and a higher speed DDR2/Mobile DDR controller. The Ethernet Media Access Controller (EMAC) provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or

10 Mbits/second (Mbps) and

100 Mbps in either half- or full-duplex mode. Additionally an Management Data Input/Output (MDIO) interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces. The SATA controller provides a high-spee........