PDF《RD8100™》

s locating circuitry, and supplies a Radiodetection Calibration Certificate when a positive test result is obtained. To run an eCert, the locator should be connected to an internet-enabled PC on which the RD Manager software is installed. Refer to the RD Manager operation manual for further details. Additional purchase may be required. RD8100 locators incorporate an Enhanced Self-Test feature. In addition to the typical checks for display and power functions, the RD8100 applies test signals to its locating circuitry during a Self-Test to check accuracy and performance. We recommend that a self-test is run at least weekly, or before each use.

6 7 RD8100 locator

1 2

3 4

5 6

9 7

8 16

17 18

18 22

10 11

12 13

14 15

12 32

35 36

37 38

34 19

20 21

23 24

25 26

27 29

30 33

31 28

12 or more satellites in view 9-11 satellites in view 6-8 satellites in view 3-5 satellites in view GPS satellite lock acquired GPS active, seeking satellite lock Locator features 1. Keypad. 2. LCD with auto backlight. 3. Speaker. 4. Battery compartment. 5. Optional Lithium-Ion battery pack. 6. Accessory connector. 7. Headphone connector. 8. Bluetooth? module antenna. 9. USB port (inside battery compartment). Locator keypad 10. Power key. 11. Frequency key. 12. Up and down arrows. 13. Antenna key. 14. Survey key. 15. Transmitter key. Locator screen icons 16. Signal strength bargraph with peak marker. 17. Signal strength readout. 18. Null / Proportional Guidance arrows. 19. Battery level. 20. Sensitivity readout / Log number. 21. Volume level. 22. Current Direction arrows. 23. Radio Mode icon. 24. Power Mode icon. 25. Accessory / Measurement icon. 26. CD Mode icon. 27. A-Frame icon. 28. Frequency / current / menu readout. 29. Bluetooth status icon: Flashing icon means pairing is in progress. Solid icon indicates a connection is active. 30. Antenna mode icon: Indicates antenna mode selection: Peak / Null / Broad Peak / Peak+ / Guidance. 31. Sonde icon: Indicates that a sonde signal source is selected. 32. Line icon: Indicates that a line signal source is selected. 33. Compass: Shows the orientation of the located cable or sonde relative to the locator. 34. Transmitter communication status C confirms successful iLOC? communication. 35. Transmitter standby indicator. 36. Depth readout. GPS equipped locators only: 37. GPS Status. 38. GPS Signal quality.

8 9 Tx-1, Tx-5 and Tx-10 transmitters

1 3

4 2

6 11

12 13

14 15

16 17

18 19

20 21

22 23

5 7

8 9

10 Transmitter features 1. Keypad. 2. LCD. 3. Removable accessory tray. 4. D-cell battery tray. 5. Optional Lithium-Ion battery pack. 6. Bluetooth module (iLOC units). Transmitter keypad 7. Power key. 8. Frequency key. 9. Up and down arrows. 10. Measure key. Transmitter screen icons 11. Battery level indicator. 12. Operation mode readout. 13. Standby icon. 14. Output level indicator. 15. Clamp icon: Indicates when a signal clamp or other accessory is connected. 16. DC Power connected indicator. 17. Induction mode indicator. 18. A-Frame: Indicates when the transmitter is in Fault-Find Mode. 19. CD Mode: Indicates that the transmitter is in Current Direction Mode. 20. Voltage warning indicator: Indicates that the transmitter is outputting potentially hazardous voltage levels. 21. Volume level indicator. iLOC enabled transmitters only: 22. Pairing icon: Appears when the transmitter and locator are connected via iLOC. 23. Bluetooth icon: Indicates status of Bluetooth connection. Flashing icon means pairing is in progress.